EZ Dupe, Inc. SD Pantera 1-to-7 SD/MicroSD Duplicator 35MB/s SDC07-SSP
- SD/MicroSD Duplicat…
- 1 to 7
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
EZ Dupe, Inc.
Standalone duplicator copies up to 23 SD or MicroSD cards at 2 GB/min with DoD-compliant erase modes
The EZ Dupe SD Pantera SDC23-SSP copies up to 23 Secure Digital or MicroSD cards at once without a host computer. Each slot runs independently at up to 35 MB per second, reaching about 2 GB per minute per card. A 16 x 2 LCD and onboard controls let operators select copy or erase modes directly on the unit.
This duplicator suits organisations that must clone large batches of SDHC or SDXC cards and also require certified data sanitisation. Four copy modes and four erase modes, including DoD 3-pass and 7-pass options, cover both rapid deployment and compliance workflows. Buyers who need to duplicate other flash form factors such as USB drives or CFexpress cards should look at a different platform.
The single specification that decides fit is the combination of 23 target slots and a sustained 35 MB per second per slot. If the workload demands fewer simultaneous targets or lower throughput, a smaller duplicator will cost less; if it demands more targets or higher per-slot speed, this model will not keep pace.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC23-SSP |
| Target | 1 to 23 |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 11 x 7.2 x 13 |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The unit uses slot-load connectors rated for professional duplication workloads; no user-replaceable slot modules are specified by the manufacturer.
Each of the 23 ports runs independently at up to 35 MB/s, so aggregate throughput scales with target count without a shared bus bottleneck.
The duplicator operates from a 115-230 V 50/60 Hz supply in an 11 x 7.2 x 13 inch chassis with no supplemental cooling details published.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?