EZ Dupe, Inc. SD Pantera SDC47-SSP 1 to 47 Duplicator
- SD/MicroSD Duplicat…
- 1 to 47
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Standalone duplicator copies up to 79 SD or MicroSD cards at 35 MB/s with four copy modes and DoD-compliant erase options
The SD Pantera is a standalone duplicator that copies one master Secure Digital or MicroSD card to as many as seventy-nine targets simultaneously. It operates without a host computer, using an integrated Athena controller and a sixteen-by-two character LCD for menu navigation.
Quick Copy transfers only occupied data space, while Whole Media copies every sector including empty areas. Partitioned Copy and Percentage Copy let you duplicate specific regions when the file system is undefined. Erase options range from Quick and Full Erase to three-pass and seven-pass sanitisation compliant with the 5220.22-M standard.
Each slot sustains up to thirty-five megabytes per second, delivering a combined rate of two gigabytes per minute across all targets. The one-hundred-twenty-eight megabyte buffer smooths burst transfers, but the unit tops out at seventy-nine ports and does not support other flash form factors such as CompactFlash or USB drives.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC79-SSP |
| Panel Color | Black |
| LightScribe Support | No |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 22 x 7.2 x 16.5 |
| Target | 1 to 79 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 128M buffer memory is integrated into the Athena Controller and requires no user maintenance or replacement.
Each port operates independently at up to 35MB/s, so sustained use across all 79 targets does not reduce individual slot speed.
The duplicator uses slot-load ports with no moving drives, keeping heat and noise minimal during extended operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?