EZ Dupe, Inc. SD Pantera 1-to-15 SD/MicroSD Duplicator (SDC15-SSP)
- SD/MicroSD Duplicat…
- 1 to 15
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
EZ Dupe, Inc.
Standalone duplicator copies up to 39 SD or MicroSD cards at 35 MB/s with DoD-compliant erase modes
The EZ Dupe SD Pantera SDC39-SSP is a standalone duplicator that copies up to 39 Secure Digital or MicroSD cards simultaneously. It operates without a host computer, software or network connection, so each slot runs independently at up to 35 MB/s. The unit is aimed at organisations that need high-volume, secure flash-media duplication in a single appliance.
Moving from a single-slot reader or a PC-driven workflow to this 39-target tower removes the bottleneck of sequential copies and frees the host system for other tasks. The jump is worth it when daily batch sizes exceed a handful of cards and when data must never leave the duplication device, because the standalone architecture keeps the source media physically isolated from any network.
Each of the 39 slots accepts SD, SDHC, SDXC or MicroSD cards and delivers up to 2 GB/min per port. Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — handle defined and undefined file systems. Four erase modes include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass to the 5220.22-M standard, so the same hardware covers both duplication and compliant sanitisation.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC39-SSP |
| Target | 1 to 39 |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 14.75 x 7.2 x 13 |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
The unit measures 14.75 inches high, 7.2 inches wide and 13 inches deep, so allow at least that much clearance on a bench or shelf.
Insert the master SD or MicroSD card into the dedicated source slot, then load up to 39 target cards into the remaining slots before selecting a copy mode on the 16 x 2 LCD menu.
Keep the 39 card slots free of dust and debris; the 128 MB buffer and standalone firmware need no user-serviceable parts or scheduled maintenance.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?