Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Eight red DDR3 memory modules with tall toothed heatsinks

G.SKILL

G.SKILL Ripjaws Z 32GB (8×4GB) DDR3-1600 CL9 desktop RAM F3-12800CL9Q2-32GBZL

SKU CH-PN79-3PGJ4 MPN F3-12800CL9Q2-32GBZL

32 GB DDR3-1600 CL9 quad-channel kit for Intel X79 platforms at 1.50 V

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL9
  • Timing9-9-9-24
  • Voltage1.50V
  • ECCNo
  • 32 GB capacity across eight modules for high-density builds
  • DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
  • CL9 9-9-9-24 timing for responsive system performance
  • 50 V operation keeps power draw efficient
  • Quad-channel kit validated on LGA 2011 X79 platforms

Quad-Channel 32 GB Kit for LGA 2011

This G.SKILL Ripjaws Z kit delivers 32 GB of DDR3 memory across eight 4 GB modules. It is built for Intel Core i7 processors on the X79 platform using the LGA 2011 socket. The quad-channel layout matches the architecture of those CPUs for full bandwidth utilisation.

Sustained Load Behaviour at 1600 MHz

Rated at DDR3 1600 with CL9 9-9-9-24 timings, the modules run at 1.50 V under continuous operation. The aluminium heatspreader dissipates heat during extended sessions, keeping timing stability intact. Each channel can sustain up to 12.8 GB/s throughput without throttling.

DDR3 Platform Limits

The DDR3 interface tops out at the 1600 MHz speed grade and 1.50 V standard voltage used here. Higher frequencies or tighter latencies would require a different memory generation. Quad-channel operation is only available on compatible LGA 2011 processors and X79 chipsets.

Erősségek

  • 32 GB capacity across eight modules for high-density builds
  • DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
  • CL9 9-9-9-24 timing for responsive system performance
  • 50 V operation keeps power draw efficient
  • Quad-channel kit validated on LGA 2011 X79 platforms

Műszaki adatok

BrandG.SKILL
SeriesRipjaws Z Series
ModelF3-12800CL9Q2-32GBZL
Capacity32GB (8 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL9
Timing9-9-9-24
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
FeaturesQuad channel memory designed for LGA2011 Intel Core-i7 processors and X79 platforms.
Intel XMP ready.
Szállítási súly0.44 kg
Csomagméret191 × 104 × 76 mm

Kérdések a termékről

How much heat and power will the 1.50V DDR3-1600 CL9 kit generate when running all day?

The modules operate at the standard DDR3 voltage of 1.50V with CL9 9-9-9-24 timings, so power draw and heat output are typical for DDR3-1600 unbuffered DIMMs. The Ripjaws Z aluminium heatspreaders are designed to dissipate that heat during sustained quad-channel workloads.

What motherboard and CPU combination is required to run this 32GB kit as intended?

The kit is engineered for quad-channel operation on Intel LGA 2011 Core i7 processors paired with X79 chipset motherboards. You need four populated slots per channel (eight slots total) to achieve the rated 12.8 GB/s bandwidth per channel.

Will the red Ripjaws Z heatspreaders clear large CPU coolers on an X79 board?

The heatspreaders use a low-profile toothed design intended for tight clearances around LGA 2011 sockets, but physical fit depends on the specific cooler’s mounting geometry and motherboard DIMM-slot spacing.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.