BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279851BTC
În stoc
G.SKILL
G.SKILL Ripjaws Z 32GB (8×4GB) DDR3-1600 CL9 desktop RAM F3-12800CL9Q2-32GBZL
32 GB DDR3-1600 CL9 quad-channel kit for Intel X79 platforms at 1.50 V
- Capacity32GB (8 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL9
- Timing9-9-9-24
- Voltage1.50V
- ECCNo
- 32 GB capacity across eight modules for high-density builds
- DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
- CL9 9-9-9-24 timing for responsive system performance
- 50 V operation keeps power draw efficient
- Quad-channel kit validated on LGA 2011 X79 platforms
Quad-Channel 32 GB Kit for LGA 2011
This G.SKILL Ripjaws Z kit delivers 32 GB of DDR3 memory across eight 4 GB modules. It is built for Intel Core i7 processors on the X79 platform using the LGA 2011 socket. The quad-channel layout matches the architecture of those CPUs for full bandwidth utilisation.
Sustained Load Behaviour at 1600 MHz
Rated at DDR3 1600 with CL9 9-9-9-24 timings, the modules run at 1.50 V under continuous operation. The aluminium heatspreader dissipates heat during extended sessions, keeping timing stability intact. Each channel can sustain up to 12.8 GB/s throughput without throttling.
DDR3 Platform Limits
The DDR3 interface tops out at the 1600 MHz speed grade and 1.50 V standard voltage used here. Higher frequencies or tighter latencies would require a different memory generation. Quad-channel operation is only available on compatible LGA 2011 processors and X79 chipsets.
Puncte forte
- 32 GB capacity across eight modules for high-density builds
- DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
- CL9 9-9-9-24 timing for responsive system performance
- 50 V operation keeps power draw efficient
- Quad-channel kit validated on LGA 2011 X79 platforms
Specificații
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws Z Series |
| Model | F3-12800CL9Q2-32GBZL |
| Capacity | 32GB (8 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Red |
| Features | Quad channel memory designed for LGA2011 Intel Core-i7 processors and X79 platforms. Intel XMP ready. |
| Greutate la expediere | 0.44 kg |
| Dimensiunile coletului | 191 × 104 × 76 mm |
Întrebări despre acest articol
How much heat and power will the 1.50V DDR3-1600 CL9 kit generate when running all day?
The modules operate at the standard DDR3 voltage of 1.50V with CL9 9-9-9-24 timings, so power draw and heat output are typical for DDR3-1600 unbuffered DIMMs. The Ripjaws Z aluminium heatspreaders are designed to dissipate that heat during sustained quad-channel workloads.
What motherboard and CPU combination is required to run this 32GB kit as intended?
The kit is engineered for quad-channel operation on Intel LGA 2011 Core i7 processors paired with X79 chipset motherboards. You need four populated slots per channel (eight slots total) to achieve the rated 12.8 GB/s bandwidth per channel.
Will the red Ripjaws Z heatspreaders clear large CPU coolers on an X79 board?
The heatspreaders use a low-profile toothed design intended for tight clearances around LGA 2011 sockets, but physical fit depends on the specific cooler’s mounting geometry and motherboard DIMM-slot spacing.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
