אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Eight red DDR3 memory modules with tall toothed heatsinks

G.SKILL

G.SKILL Ripjaws Z 32GB (8×4GB) DDR3-1600 CL9 desktop RAM F3-12800CL9Q2-32GBZL

SKU CH-PN79-3PGJ4 MPN F3-12800CL9Q2-32GBZL

32 GB DDR3-1600 CL9 quad-channel kit for Intel X79 platforms at 1.50 V

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL9
  • Timing9-9-9-24
  • Voltage1.50V
  • ECCNo
  • 32 GB capacity across eight modules for high-density builds
  • DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
  • CL9 9-9-9-24 timing for responsive system performance
  • 50 V operation keeps power draw efficient
  • Quad-channel kit validated on LGA 2011 X79 platforms

Quad-Channel 32 GB Kit for LGA 2011

This G.SKILL Ripjaws Z kit delivers 32 GB of DDR3 memory across eight 4 GB modules. It is built for Intel Core i7 processors on the X79 platform using the LGA 2011 socket. The quad-channel layout matches the architecture of those CPUs for full bandwidth utilisation.

Sustained Load Behaviour at 1600 MHz

Rated at DDR3 1600 with CL9 9-9-9-24 timings, the modules run at 1.50 V under continuous operation. The aluminium heatspreader dissipates heat during extended sessions, keeping timing stability intact. Each channel can sustain up to 12.8 GB/s throughput without throttling.

DDR3 Platform Limits

The DDR3 interface tops out at the 1600 MHz speed grade and 1.50 V standard voltage used here. Higher frequencies or tighter latencies would require a different memory generation. Quad-channel operation is only available on compatible LGA 2011 processors and X79 chipsets.

נקודות עיקריות

  • 32 GB capacity across eight modules for high-density builds
  • DDR3-1600 speed delivers 12.8 GB/s bandwidth per channel
  • CL9 9-9-9-24 timing for responsive system performance
  • 50 V operation keeps power draw efficient
  • Quad-channel kit validated on LGA 2011 X79 platforms

מפרט טכני

BrandG.SKILL
SeriesRipjaws Z Series
ModelF3-12800CL9Q2-32GBZL
Capacity32GB (8 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL9
Timing9-9-9-24
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
FeaturesQuad channel memory designed for LGA2011 Intel Core-i7 processors and X79 platforms.
Intel XMP ready.
משקל משלוח0.44 kg
מידות האריזה191 × 104 × 76 mm

שאלות על הפריט הזה

How much heat and power will the 1.50V DDR3-1600 CL9 kit generate when running all day?

The modules operate at the standard DDR3 voltage of 1.50V with CL9 9-9-9-24 timings, so power draw and heat output are typical for DDR3-1600 unbuffered DIMMs. The Ripjaws Z aluminium heatspreaders are designed to dissipate that heat during sustained quad-channel workloads.

What motherboard and CPU combination is required to run this 32GB kit as intended?

The kit is engineered for quad-channel operation on Intel LGA 2011 Core i7 processors paired with X79 chipset motherboards. You need four populated slots per channel (eight slots total) to achieve the rated 12.8 GB/s bandwidth per channel.

Will the red Ripjaws Z heatspreaders clear large CPU coolers on an X79 board?

The heatspreaders use a low-profile toothed design intended for tight clearances around LGA 2011 sockets, but physical fit depends on the specific cooler’s mounting geometry and motherboard DIMM-slot spacing.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.