Geometric Future Squama 2503R 140mm case fan White
- 140mm
- 25
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Geometric Future
Three 140 mm reverse-blade fans with addressable RGB dual light loops, PWM speed control from 800 to 2400 rpm, 91.15 CFM airflow, 2.63 mm H₂O pressure and 34 dB(A) noise
Color Black
Model Squama 2503R 140x25mm Reverse
Option 3 Packs
The set contains three 140mm case fans with a 25mm frame and reversed blades that can serve as intake fans while showing the front face. Hydro Dynamic Bearings and a patented Squama particle texture on the frame reduce turbulent noise while improving airflow and pressure efficiency. PWM control adjusts speed between 800 and 2400 RPM. Dual addressable RGB light loops on each fan connect to a standard 5 V 3-pin header for motherboard synchronisation.
Suitable for systems that need matched intake or exhaust fans with addressable RGB effects and a wide speed range for quiet or high-performance curves. The reversed blade design is a specific aesthetic and functional choice; builders who prefer conventional blade orientation or single-loop lighting should look at other models. The three-fan pack also assumes enough 140mm mounting points for all units.
Peak airflow reaches 91.15 CFM with 2.63 mm H2O of static pressure at the maximum 2400 RPM setting, while noise stays at 34 dB(A). This single figure set determines whether the fans can move enough air through restrictive radiators or dense mesh panels for a given thermal target.
| Fan Size | 140mm |
|---|---|
| Fan Thickness | 25 |
| Bearing Type | Hydro Dynamic Bearings |
| RPM | 800~2400 |
| Air Flow | 91.15 |
| Air Pressure | 2.63 |
| Noise Level | 34 |
| Power Connector | PWM 4Pin |
| Color | Black |
| LED | Addressable RGB |
| Dimensions | 140mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The fans reach a maximum of 34 dB(A) at 2400 RPM, with a minimum speed of 800 RPM for quieter operation.
Yes, the addressable RGB lighting requires a standard 5V 3-pin ARGB header on the motherboard or a compatible controller.
The 2.63 mm H₂O pressure rating and 91.15 CFM airflow are designed for radiators and heatsinks, providing strong airflow through restrictive fins.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?