Geometric Future Squama 2503R 140mm White 3-Pack case fan
- 140mm
- 25
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Geometric Future
A 30 mm thick 120 mm reverse-blade fan triple-pack delivering 76 CFM airflow and 2.3 mmH2O pressure at up to 2250 RPM with double-sided ARGB lighting and hydro dynamic bearings
Color Black
Model Squama 3003R / 120x30mm Reverse
Option 3 Packs
The Geometric Future Squama 3003R-12 is a 120 mm case fan with a 30 mm thick frame and reverse-curved blades. It targets builders who need higher static pressure for radiators or restrictive meshes and want addressable RGB on both sides. The pack contains three fans ready for PWM control.
At 2250 RPM the fans move 76 CFM with 2.3 mmH₂O of static pressure, enough for dense fin stacks or front-panel filters. At 800 RPM noise drops to 36.4 dBA for quieter idle operation. The hydro dynamic bearing and dragon-scale frame texture are designed to sustain these figures over long-term use.
Speed is managed through a standard 4-pin PWM header, allowing the motherboard to vary RPM between 800 and 2250 automatically. Lighting connects to a 5 V 3-pin addressable RGB header for synchronisation with compatible board software. Builders without a 5 V ARGB header or with only 12 V RGB connectors cannot use the lighting functions.
| Brand | Geometric Future |
|---|---|
| Series | Squama 3003-12 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 30mm |
| Bearing Type | Hydro Bearing |
| RPM | 800~2250 RPM |
| Air Flow | 76 CFM |
| Air Pressure | 2.3 mmH2O |
| Noise Level | 36.4 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| Dimensions | 120 x 120 x 30 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The 30mm frame is 5mm thicker than a standard 25mm fan, so verify your case clearance at each mounting location before installing the three fans.
Connect the 5V 3-pin ARGB headers to a compatible motherboard; the edge-lit accents on both sides of each fan will then respond to the board's lighting software.
Each fan has an integrated 4-pin PWM power connector and a 5V 3-pin ARGB lead, so no separate cables are required for basic operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?