Geometric Future Squama 2503R 140mm White 3-Pack case fan
- 140mm
- 25
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Geometric Future
A 30 mm thick 120 mm reverse-blade fan triple-pack delivering 76 CFM airflow and 2.3 mmH2O pressure at up to 2250 RPM with double-sided ARGB lighting and hydro dynamic bearings
Color Black
Model Squama 3003R / 120x30mm Reverse
Option 3 Packs
The Geometric Future Squama 3003R-12 is a 120 mm case fan with a 30 mm thick frame and reverse-curved blades. It targets builders who need higher static pressure for radiators or restrictive meshes and want addressable RGB on both sides. The pack contains three fans ready for PWM control.
At 2250 RPM the fans move 76 CFM with 2.3 mmH₂O of static pressure, enough for dense fin stacks or front-panel filters. At 800 RPM noise drops to 36.4 dBA for quieter idle operation. The hydro dynamic bearing and dragon-scale frame texture are designed to sustain these figures over long-term use.
Speed is managed through a standard 4-pin PWM header, allowing the motherboard to vary RPM between 800 and 2250 automatically. Lighting connects to a 5 V 3-pin addressable RGB header for synchronisation with compatible board software. Builders without a 5 V ARGB header or with only 12 V RGB connectors cannot use the lighting functions.
| Brand | Geometric Future |
|---|---|
| Series | Squama 3003-12 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 30mm |
| Bearing Type | Hydro Bearing |
| RPM | 800~2250 RPM |
| Air Flow | 76 CFM |
| Air Pressure | 2.3 mmH2O |
| Noise Level | 36.4 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| Dimensions | 120 x 120 x 30 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The 30mm frame is 5mm thicker than a standard 25mm fan, so verify your case clearance at each mounting location before installing the three fans.
Connect the 5V 3-pin ARGB headers to a compatible motherboard; the edge-lit accents on both sides of each fan will then respond to the board's lighting software.
Each fan has an integrated 4-pin PWM power connector and a 5V 3-pin ARGB lead, so no separate cables are required for basic operation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?