暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three black 120mm reverse-blade fans with thick 30mm frames and double-sided ARGB lighting

Geometric Future

Geometric Future Squama 3003R-12 120x30mm Reverse Blade ARGB PWM Case Fan 3-Pack Black

SKU CH-MVPQ-AKHGV

A 30 mm thick 120 mm reverse-blade fan triple-pack delivering 76 CFM airflow and 2.3 mmH2O pressure at up to 2250 RPM with double-sided ARGB lighting and hydro dynamic bearings

  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness30mm
  • Bearing TypeHydro Bearing
  • RPM800~2250 RPM
  • Air Flow76 CFM

Color Black

Model Squama 3003R / 120x30mm Reverse

Option 3 Packs

  • 30mm thick frame boosts static pressure to 2.3 mmH2O
  • 76 CFM airflow at 2250 RPM cools cases and radiators effectively
  • Double-sided ARGB edge lighting syncs with 5V 3-pin motherboard headers
  • PWM control from 800 to 2250 RPM balances performance and 36.4 dBA noise
  • Hydro Dynamic Bearing with dragon-scale frame cuts vibration for lasting reliability

120 mm × 30 mm Reverse-Blade Fans

The Geometric Future Squama 3003R-12 is a 120 mm case fan with a 30 mm thick frame and reverse-curved blades. It targets builders who need higher static pressure for radiators or restrictive meshes and want addressable RGB on both sides. The pack contains three fans ready for PWM control.

76 CFM Airflow and 2.3 mmH₂O Pressure

At 2250 RPM the fans move 76 CFM with 2.3 mmH₂O of static pressure, enough for dense fin stacks or front-panel filters. At 800 RPM noise drops to 36.4 dBA for quieter idle operation. The hydro dynamic bearing and dragon-scale frame texture are designed to sustain these figures over long-term use.

4-Pin PWM and 5 V ARGB Interface

Speed is managed through a standard 4-pin PWM header, allowing the motherboard to vary RPM between 800 and 2250 automatically. Lighting connects to a 5 V 3-pin addressable RGB header for synchronisation with compatible board software. Builders without a 5 V ARGB header or with only 12 V RGB connectors cannot use the lighting functions.

特長

  • 30mm thick frame boosts static pressure to 2.3 mmH2O
  • 76 CFM airflow at 2250 RPM cools cases and radiators effectively
  • Double-sided ARGB edge lighting syncs with 5V 3-pin motherboard headers
  • PWM control from 800 to 2250 RPM balances performance and 36.4 dBA noise
  • Hydro Dynamic Bearing with dragon-scale frame cuts vibration for lasting reliability

仕様

BrandGeometric Future
SeriesSquama 3003-12
TypeCase Fan
CompatibilityCase
Fan Thickness30mm
Bearing TypeHydro Bearing
RPM800~2250 RPM
Air Flow76 CFM
Air Pressure2.3 mmH2O
Noise Level36.4 dBA
Power Connector4 Pin
ColorBlack
LEDAddressable RGB
Dimensions120 x 120 x 30 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 30mm thick Squama 3003R-12 fans fit in a case designed for standard 25mm fans?

The 30mm frame is 5mm thicker than a standard 25mm fan, so verify your case clearance at each mounting location before installing the three fans.

How do I confirm the double-sided ARGB lighting is synchronised with my motherboard?

Connect the 5V 3-pin ARGB headers to a compatible motherboard; the edge-lit accents on both sides of each fan will then respond to the board's lighting software.

Does the 3-pack include the 4-pin PWM cables and ARGB connectors needed for installation?

Each fan has an integrated 4-pin PWM power connector and a 5V 3-pin ARGB lead, so no separate cables are required for basic operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。