Geometric Future Squama 2503R 140mm White 3-Pack case fan
- 140mm
- 25
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Geometric Future
A 30 mm thick 120 mm reverse-blade fan triple-pack delivering 76 CFM airflow and 2.3 mmH2O pressure at up to 2250 RPM with double-sided ARGB lighting and hydro dynamic bearings
Color Black
Model Squama 3003R / 120x30mm Reverse
Option 3 Packs
The Geometric Future Squama 3003R-12 is a 120 mm case fan with a 30 mm thick frame and reverse-curved blades. It targets builders who need higher static pressure for radiators or restrictive meshes and want addressable RGB on both sides. The pack contains three fans ready for PWM control.
At 2250 RPM the fans move 76 CFM with 2.3 mmH₂O of static pressure, enough for dense fin stacks or front-panel filters. At 800 RPM noise drops to 36.4 dBA for quieter idle operation. The hydro dynamic bearing and dragon-scale frame texture are designed to sustain these figures over long-term use.
Speed is managed through a standard 4-pin PWM header, allowing the motherboard to vary RPM between 800 and 2250 automatically. Lighting connects to a 5 V 3-pin addressable RGB header for synchronisation with compatible board software. Builders without a 5 V ARGB header or with only 12 V RGB connectors cannot use the lighting functions.
| Brand | Geometric Future |
|---|---|
| Series | Squama 3003-12 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 30mm |
| Bearing Type | Hydro Bearing |
| RPM | 800~2250 RPM |
| Air Flow | 76 CFM |
| Air Pressure | 2.3 mmH2O |
| Noise Level | 36.4 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| Dimensions | 120 x 120 x 30 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 30mm frame is 5mm thicker than a standard 25mm fan, so verify your case clearance at each mounting location before installing the three fans.
Connect the 5V 3-pin ARGB headers to a compatible motherboard; the edge-lit accents on both sides of each fan will then respond to the board's lighting software.
Each fan has an integrated 4-pin PWM power connector and a 5V 3-pin ARGB lead, so no separate cables are required for basic operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?