Geometric Future Squama 2503R Reverse Blade 140mm case fan
- 140mm
- 25
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Geometric Future
Three 140 mm white fans with reversed blades, hydro dynamic bearings and dual addressable RGB loops deliver 91.15 CFM at up to 34 dB
Color White
Model Squama 2503R 140x25mm Reverse
Option 3 Packs
This set contains three 140 mm case fans with reversed blades so the front face works as an intake. Each unit uses hydro dynamic bearings and a 4-pin PWM connector for speed control between 800 and 2400 rpm. Addressable RGB lighting runs on a 5 V 3-pin header and features a dual light loop for synchronised effects. The white frames include Squama particle patterning to smooth airflow.
The 4-pin PWM interface limits automatic speed control to the 800–2400 rpm window; the fan will not spin slower or faster than this range under motherboard command. Maximum static pressure reaches 2.63 mm H₂O, which caps the fan’s ability to push air through dense radiator fins or restrictive filters. At full speed the noise level hits 34 dB(A), so silent builds may need to run below the top of the curve. Airflow peaks at 91.15 CFM, defining the upper bound for case turnover.
The 25 mm frame depth decides whether the fans fit in slim radiator mounts, tight side-panel clearances or compact chassis brackets. Buyers with thinner mounting slots cannot use this three-pack.
| Fan Size | 140mm |
|---|---|
| Fan Thickness | 25 |
| Bearing Type | Hydro Dynamic Bearings |
| RPM | 800~2400 |
| Air Flow | 91.15 |
| Air Pressure | 2.63 |
| Noise Level | 34 |
| Power Connector | PWM 4Pin |
| Color | White |
| LED | Addressable RGB |
| Dimensions | 140mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The listing is a 3-pack of 140mm white fans with reversed blades, dual ARGB loops and 4-pin PWM control, so you get three matching units in one box.
At 2400 RPM the fans move 91.15 CFM with 2.63 mm H₂O static pressure, giving strong airflow through radiators or mesh while staying at 34 dB(A).
Each fan uses a standard 5 V 3-pin addressable RGB connector for lighting and a 4-pin PWM connector for speed control from 800 to 2400 RPM.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?