Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Three black 120mm reverse-blade fans with thick 30mm frames and double-sided ARGB lighting

Geometric Future

Geometric Future Squama 3003R-12 120x30mm Reverse Blade ARGB PWM Case Fan 3-Pack Black

SKU CH-MVPQ-AKHGV

A 30 mm thick 120 mm reverse-blade fan triple-pack delivering 76 CFM airflow and 2.3 mmH2O pressure at up to 2250 RPM with double-sided ARGB lighting and hydro dynamic bearings

  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness30mm
  • Bearing TypeHydro Bearing
  • RPM800~2250 RPM
  • Air Flow76 CFM

Color Black

Model Squama 3003R / 120x30mm Reverse

Versiunile tăiate există, dar nu sunt disponibile aici.

Option 3 Packs

  • 1 Pack
  • 3 Packs

Versiunile tăiate există, dar nu sunt disponibile aici.

  • 30mm thick frame boosts static pressure to 2.3 mmH2O
  • 76 CFM airflow at 2250 RPM cools cases and radiators effectively
  • Double-sided ARGB edge lighting syncs with 5V 3-pin motherboard headers
  • PWM control from 800 to 2250 RPM balances performance and 36.4 dBA noise
  • Hydro Dynamic Bearing with dragon-scale frame cuts vibration for lasting reliability

120 mm × 30 mm Reverse-Blade Fans

The Geometric Future Squama 3003R-12 is a 120 mm case fan with a 30 mm thick frame and reverse-curved blades. It targets builders who need higher static pressure for radiators or restrictive meshes and want addressable RGB on both sides. The pack contains three fans ready for PWM control.

76 CFM Airflow and 2.3 mmH₂O Pressure

At 2250 RPM the fans move 76 CFM with 2.3 mmH₂O of static pressure, enough for dense fin stacks or front-panel filters. At 800 RPM noise drops to 36.4 dBA for quieter idle operation. The hydro dynamic bearing and dragon-scale frame texture are designed to sustain these figures over long-term use.

4-Pin PWM and 5 V ARGB Interface

Speed is managed through a standard 4-pin PWM header, allowing the motherboard to vary RPM between 800 and 2250 automatically. Lighting connects to a 5 V 3-pin addressable RGB header for synchronisation with compatible board software. Builders without a 5 V ARGB header or with only 12 V RGB connectors cannot use the lighting functions.

Puncte forte

  • 30mm thick frame boosts static pressure to 2.3 mmH2O
  • 76 CFM airflow at 2250 RPM cools cases and radiators effectively
  • Double-sided ARGB edge lighting syncs with 5V 3-pin motherboard headers
  • PWM control from 800 to 2250 RPM balances performance and 36.4 dBA noise
  • Hydro Dynamic Bearing with dragon-scale frame cuts vibration for lasting reliability

Specificații

BrandGeometric Future
SeriesSquama 3003-12
TypeCase Fan
CompatibilityCase
Fan Thickness30mm
Bearing TypeHydro Bearing
RPM800~2250 RPM
Air Flow76 CFM
Air Pressure2.3 mmH2O
Noise Level36.4 dBA
Power Connector4 Pin
ColorBlack
LEDAddressable RGB
Dimensions120 x 120 x 30 mm

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 30mm thick Squama 3003R-12 fans fit in a case designed for standard 25mm fans?

The 30mm frame is 5mm thicker than a standard 25mm fan, so verify your case clearance at each mounting location before installing the three fans.

How do I confirm the double-sided ARGB lighting is synchronised with my motherboard?

Connect the 5V 3-pin ARGB headers to a compatible motherboard; the edge-lit accents on both sides of each fan will then respond to the board's lighting software.

Does the 3-pack include the 4-pin PWM cables and ARGB connectors needed for installation?

Each fan has an integrated 4-pin PWM power connector and a 5V 3-pin ARGB lead, so no separate cables are required for basic operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.