Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch SATA hard drive with hot-swap tray, bare drive condition

IBM

IBM 81Y9798 3TB 7200 RPM SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-RV99-A202E MPN 81Y9798

A 3TB 3.5-inch SATA hard drive spinning at 7200 RPM with a 6.0Gb/s interface and hot-swap tray

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • FeaturesIBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the
  • 3TB capacity stores large datasets and media libraries
  • 7200 RPM spindle speed delivers responsive read and write performance
  • SATA 6.0Gb/s interface provides high-throughput data transfer
  • 5-inch hot-swap form factor allows drive replacement without system downtime
  • New condition ensures full manufacturer-rated reliability from first use

3.5" SATA 6.0Gb/s 3TB hot-swap drive

This new IBM 81Y9798 is a 3.5-inch desktop internal hard drive that delivers 3TB of capacity at 7200 RPM over a SATA 6.0Gb/s interface. It ships as a bare drive with a hot-swap tray for tool-less installation in compatible bays. The 7.2K spindle speed and 6Gb/s transfer rate suit high-capacity nearline storage workloads.

Suited for capacity-focused arrays

Buyers who need maximum terabytes per drive in a 3.5-inch SATA form factor will find this model fits. It is not for workloads that demand 10000 or 15000 RPM spindle speeds, SAS dual-port connectivity, or 2.5-inch form factors for dense server chassis. Systems requiring PCIe-attached throughput should evaluate other drive classes.

SATA 6.0Gb/s single-port interface

The drive connects through a single SATA 6.0Gb/s port, so the host controller or backplane must provide a matching SATA link. No SAS multipath or PCIe lanes are present on this unit. Verify that your enclosure or RAID card supports 3.5-inch hot-swap SATA drives before ordering.

Erősségek

  • 3TB capacity stores large datasets and media libraries
  • 7200 RPM spindle speed delivers responsive read and write performance
  • SATA 6.0Gb/s interface provides high-throughput data transfer
  • 5-inch hot-swap form factor allows drive replacement without system downtime
  • New condition ensures full manufacturer-rated reliability from first use

Műszaki adatok

BrandIBM
Model81Y9798
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
FeaturesIBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the performance required for extensive storage capacity while providing the flexibility of hot-swap version.
Form Factor3.5"
Szállítási súly0.45 kg
Csomagméret147 × 102 × 25 mm

Kérdések a termékről

Should I choose the 3 TB model or a smaller capacity from this same drive line?

The 3 TB model gives the maximum storage in this 7200 RPM SATA 6.0 Gb/s series; the same line also offers 500 GB, 1 TB and 2 TB versions if you need less space.

What does the 7200 RPM speed mean for everyday workloads?

7200 RPM provides higher sustained transfer rates and lower rotational latency than slower-spinning drives, improving throughput for bulk data tasks.

How does the SATA 6.0 Gb/s interface limit real-world performance?

The SATA 6.0 Gb/s link caps the drive’s maximum burst transfer at 6.0 Gb/s, so sustained speeds will stay below that ceiling.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.