IBM
IBM 81Y9798 3TB 7200 RPM SATA 6.0Gb/s 3.5" internal hard drive
A 3TB 3.5-inch SATA hard drive spinning at 7200 RPM with a 6.0Gb/s interface and hot-swap tray
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity3TB
- RPM7200 RPM
- Average Latency6Gb/s
- FeaturesIBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the
- 3TB capacity stores large datasets and media libraries
- 7200 RPM spindle speed delivers responsive read and write performance
- SATA 6.0Gb/s interface provides high-throughput data transfer
- 5-inch hot-swap form factor allows drive replacement without system downtime
- New condition ensures full manufacturer-rated reliability from first use
3.5" SATA 6.0Gb/s 3TB hot-swap drive
This new IBM 81Y9798 is a 3.5-inch desktop internal hard drive that delivers 3TB of capacity at 7200 RPM over a SATA 6.0Gb/s interface. It ships as a bare drive with a hot-swap tray for tool-less installation in compatible bays. The 7.2K spindle speed and 6Gb/s transfer rate suit high-capacity nearline storage workloads.
Suited for capacity-focused arrays
Buyers who need maximum terabytes per drive in a 3.5-inch SATA form factor will find this model fits. It is not for workloads that demand 10000 or 15000 RPM spindle speeds, SAS dual-port connectivity, or 2.5-inch form factors for dense server chassis. Systems requiring PCIe-attached throughput should evaluate other drive classes.
SATA 6.0Gb/s single-port interface
The drive connects through a single SATA 6.0Gb/s port, so the host controller or backplane must provide a matching SATA link. No SAS multipath or PCIe lanes are present on this unit. Verify that your enclosure or RAID card supports 3.5-inch hot-swap SATA drives before ordering.
Points forts
- 3TB capacity stores large datasets and media libraries
- 7200 RPM spindle speed delivers responsive read and write performance
- SATA 6.0Gb/s interface provides high-throughput data transfer
- 5-inch hot-swap form factor allows drive replacement without system downtime
- New condition ensures full manufacturer-rated reliability from first use
Caractéristiques
| Brand | IBM |
|---|---|
| Model | 81Y9798 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 3TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Features | IBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the performance required for extensive storage capacity while providing the flexibility of hot-swap version. |
| Form Factor | 3.5" |
| Poids d’expédition | 0.45 kg |
| Dimensions du colis | 147 × 102 × 25 mm |
Questions sur cet article
Should I choose the 3 TB model or a smaller capacity from this same drive line?
The 3 TB model gives the maximum storage in this 7200 RPM SATA 6.0 Gb/s series; the same line also offers 500 GB, 1 TB and 2 TB versions if you need less space.
What does the 7200 RPM speed mean for everyday workloads?
7200 RPM provides higher sustained transfer rates and lower rotational latency than slower-spinning drives, improving throughput for bulk data tasks.
How does the SATA 6.0 Gb/s interface limit real-world performance?
The SATA 6.0 Gb/s link caps the drive’s maximum burst transfer at 6.0 Gb/s, so sustained speeds will stay below that ceiling.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
