เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

IBM

IBM 81Y9798 3TB 7200 RPM SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-RV99-A202E MPN 81Y9798

A 3TB 3.5-inch SATA hard drive spinning at 7200 RPM with a 6.0Gb/s interface and hot-swap tray

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • FeaturesIBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the
  • 3TB capacity stores large datasets and media libraries
  • 7200 RPM spindle speed delivers responsive read and write performance
  • SATA 6.0Gb/s interface provides high-throughput data transfer
  • 5-inch hot-swap form factor allows drive replacement without system downtime
  • New condition ensures full manufacturer-rated reliability from first use

3.5" SATA 6.0Gb/s 3TB hot-swap drive

This new IBM 81Y9798 is a 3.5-inch desktop internal hard drive that delivers 3TB of capacity at 7200 RPM over a SATA 6.0Gb/s interface. It ships as a bare drive with a hot-swap tray for tool-less installation in compatible bays. The 7.2K spindle speed and 6Gb/s transfer rate suit high-capacity nearline storage workloads.

Suited for capacity-focused arrays

Buyers who need maximum terabytes per drive in a 3.5-inch SATA form factor will find this model fits. It is not for workloads that demand 10000 or 15000 RPM spindle speeds, SAS dual-port connectivity, or 2.5-inch form factors for dense server chassis. Systems requiring PCIe-attached throughput should evaluate other drive classes.

SATA 6.0Gb/s single-port interface

The drive connects through a single SATA 6.0Gb/s port, so the host controller or backplane must provide a matching SATA link. No SAS multipath or PCIe lanes are present on this unit. Verify that your enclosure or RAID card supports 3.5-inch hot-swap SATA drives before ordering.

จุดเด่น

  • 3TB capacity stores large datasets and media libraries
  • 7200 RPM spindle speed delivers responsive read and write performance
  • SATA 6.0Gb/s interface provides high-throughput data transfer
  • 5-inch hot-swap form factor allows drive replacement without system downtime
  • New condition ensures full manufacturer-rated reliability from first use

ข้อมูลจำเพาะ

BrandIBM
Model81Y9798
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
FeaturesIBM 3TB 7,200 rpm 3.5-inch hot-swap SAS HDDs can provide the performance required for extensive storage capacity while providing the flexibility of hot-swap version.
Form Factor3.5"
น้ำหนักในการจัดส่ง0.45 kg
ขนาดบรรจุภัณฑ์147 × 102 × 25 mm

คำถามเกี่ยวกับสินค้านี้

Should I choose the 3 TB model or a smaller capacity from this same drive line?

The 3 TB model gives the maximum storage in this 7200 RPM SATA 6.0 Gb/s series; the same line also offers 500 GB, 1 TB and 2 TB versions if you need less space.

What does the 7200 RPM speed mean for everyday workloads?

7200 RPM provides higher sustained transfer rates and lower rotational latency than slower-spinning drives, improving throughput for bulk data tasks.

How does the SATA 6.0 Gb/s interface limit real-world performance?

The SATA 6.0 Gb/s link caps the drive’s maximum burst transfer at 6.0 Gb/s, so sustained speeds will stay below that ceiling.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที