JONSBO ZA-240BR 240mm case fan 2×120mm ARGB 28mm 700-2400rpm black
- 2 Fans
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
JONSBO
A single frame holds three 120 mm ARGB fans running 700–1800 RPM with 18.75–47.71 CFM airflow and 16.4–30.7 dB(A) noise, unified PWM and 5 V ARGB control via one motherboard connection
The JONSBO ZB-360WR combines three 120mm fans inside a single white frame measuring 362mm by 123mm by 28mm. Each fan spins between 700 and 1800 RPM and delivers 18.75 to 47.71 CFM at 16.4 to 30.7 dB(A). The unit draws 6.60W for the motors and 6.75W for the 5V ARGB lighting.
Your board must provide a 4-pin PWM header for speed control and a 5V 3-pin ARGB header for lighting. The assembly uses a single combined cable for both functions. Boards limited to 27 addressable LEDs need an external ARGB controller; newer Aura Sync compatible boards work without one. The daisy-chain male and female ARGB plugs allow adding further devices on the same header.
At continuous loads the fans operate across the full 700 to 1800 RPM range, producing 0.33 to 1.66 mmH2O static pressure. The 28mm thick blades maintain the quoted CFM and noise envelope without the short-burst spikes seen on thinner designs. Unified PWM regulation keeps all three rotors synchronised so airflow stays steady during long rendering or gaming sessions.
| Brand | JONSBO |
|---|---|
| Series | ZB SERIES |
| Model | ZB-360WR |
| Fan Size | 120mm |
| LED | ARGB |
| Type | Case Fan |
| RPM | 700-1800rpm(±10%) |
| Air Flow | 18.75-47.71 CFM |
| Noise Level | 16.4-30.7 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | White |
| Compatibility | Case |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Fan Thickness | 28mm |
| Air Pressure | 0.33-1.66 mmH2O |
| Dimensions | 362mm(L)*123mm(W)*28mm(H) |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The product is a single 362 mm frame that holds three 120 mm ARGB fans pre-assembled, so no separate fan brackets are required; only a motherboard PWM 4-pin header and a 5 V 3-pin ARGB header are needed for power and lighting.
The ZB-360WR is offered in white with a 28 mm thick frame and infinity-mirror lighting on four sides, making it the intended choice for white or light-coloured chassis aesthetics.
At the maximum 1800 RPM the three fans together move up to 47.71 CFM with a static pressure of 1.66 mmH₂O, while noise stays between 16.4 and 30.7 dB(A) depending on the PWM curve set in the BIOS.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?