JONSBO ZA-240BR 240mm case fan 2×120mm ARGB 28mm 700-2400rpm black
- 2 Fans
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
JONSBO
A single frame holds three 120 mm ARGB fans running 700–1800 RPM with 18.75–47.71 CFM airflow and 16.4–30.7 dB(A) noise, unified PWM and 5 V ARGB control via one motherboard connection
The JONSBO ZB-360WR combines three 120mm fans inside a single white frame measuring 362mm by 123mm by 28mm. Each fan spins between 700 and 1800 RPM and delivers 18.75 to 47.71 CFM at 16.4 to 30.7 dB(A). The unit draws 6.60W for the motors and 6.75W for the 5V ARGB lighting.
Your board must provide a 4-pin PWM header for speed control and a 5V 3-pin ARGB header for lighting. The assembly uses a single combined cable for both functions. Boards limited to 27 addressable LEDs need an external ARGB controller; newer Aura Sync compatible boards work without one. The daisy-chain male and female ARGB plugs allow adding further devices on the same header.
At continuous loads the fans operate across the full 700 to 1800 RPM range, producing 0.33 to 1.66 mmH2O static pressure. The 28mm thick blades maintain the quoted CFM and noise envelope without the short-burst spikes seen on thinner designs. Unified PWM regulation keeps all three rotors synchronised so airflow stays steady during long rendering or gaming sessions.
| Brand | JONSBO |
|---|---|
| Series | ZB SERIES |
| Model | ZB-360WR |
| Fan Size | 120mm |
| LED | ARGB |
| Type | Case Fan |
| RPM | 700-1800rpm(±10%) |
| Air Flow | 18.75-47.71 CFM |
| Noise Level | 16.4-30.7 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | White |
| Compatibility | Case |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Fan Thickness | 28mm |
| Air Pressure | 0.33-1.66 mmH2O |
| Dimensions | 362mm(L)*123mm(W)*28mm(H) |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The product is a single 362 mm frame that holds three 120 mm ARGB fans pre-assembled, so no separate fan brackets are required; only a motherboard PWM 4-pin header and a 5 V 3-pin ARGB header are needed for power and lighting.
The ZB-360WR is offered in white with a 28 mm thick frame and infinity-mirror lighting on four sides, making it the intended choice for white or light-coloured chassis aesthetics.
At the maximum 1800 RPM the three fans together move up to 47.71 CFM with a static pressure of 1.66 mmH₂O, while noise stays between 16.4 and 30.7 dB(A) depending on the PWM curve set in the BIOS.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?