JONSBO ZB-120WR (Reversed) 120mm ARGB Case Fan 700-1800rpm White
- 120mm
- ARGB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
JONSBO
A 120 mm white ARGB case fan with infinity-mirror lighting, 700–2400 RPM speed range and 20.3–36.6 dB(A) noise level
The JONSBO ZB-120W is a 120 mm white ARGB case fan built for builders who want addressable lighting and PWM speed control in a single unit. Its integrated 4‑pin PWM and 3‑pin ARGB connectors allow daisy‑chaining multiple fans without a separate controller. The 28 mm thick frame fits standard 120 mm mounting points in most chassis. It is not suited for systems that require a bundled fan hub or proprietary RGB ecosystem.
Airflow ranges from 20.95 to 65.26 CFM while noise stays between 20.3 and 36.6 dB(A) across the 700‑2400 RPM range. The 4‑pin PWM header lets the motherboard adjust speed automatically based on temperature. At lower speeds the fan runs quietly for idle or light workloads. Power draw is handled through the standard PWM connector without extra cables.
Under continuous load the fan can maintain its maximum 2400 RPM, delivering the upper airflow figure of 65.26 CFM with a corresponding noise level of 36.6 dB(A). The dual‑zone infinity mirror lighting remains active throughout operation. No external controller is included, so lighting synchronisation depends on motherboard 5 V ARGB support. The design targets steady cooling performance rather than short‑burst peaks.
| Brand | JONSBO |
|---|---|
| Series | ZB SERIES |
| Model | ZB-120W |
| Fan Size | 120mm |
| LED | ARGB |
| Type | Case Fan |
| RPM | 700-2400rpm(±10%) |
| Air Flow | 20.95-65.26 CFM |
| Noise Level | 20.3-36.6 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | White |
| Compatibility | Case |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Fan Thickness | 28mm |
| Dimensions | 4.72"L x 4.72"W x 1.1"H |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount the fan using the joint-structure frame, then plug the integrated 4-pin PWM and 3-pin ARGB male/female connectors directly into the motherboard headers; the daisy-chain design lets multiple fans share one cable run.
The sealed mirror chambers have no user-serviceable parts; only occasional dust removal from the 120 mm blades and frame is required to keep airflow at 20.95–65.26 CFM and noise at 20.3–36.6 dB(A).
Noise reaches 36.6 dB(A) before the fan hits its 2400 RPM ceiling, making acoustic output the first practical limit during continuous high-speed operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?