Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Jungle Leopard
Three white 120 mm case fans with reverse blades, hydraulic bearings, 5 V ARGB lighting and PWM control up to 2000 RPM
Color White Reverse
This pack contains three 120 mm case fans with hydraulic bearings and a 25 mm frame. Each unit spins at up to 2000 RPM and delivers 62.36 CFM of airflow at 2.21 mmAq static pressure. The 4-pin PWM connector allows speed control between 800 and 2000 RPM. Addressable RGB lighting runs on a standard 5 V 3-pin header.
The daisy-chain slide-in locking system lets the three fans share a single power and signal cable, reducing internal clutter. Users who want independent fan curves per unit or who rely on 12 V RGB headers should consider a different kit. The white frame and black blades suit light-themed builds but may clash with all-black interiors.
Interlocking pins join the fans mechanically and electrically, so only one cable reaches the motherboard. PWM control adjusts speed automatically with CPU temperature, while 5 V ARGB sync works with major board vendors for 16 million colours. Hydraulic bearings and eight damping pads keep noise at 29 dBA.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Yes, the fans use a 5V 3-pin ARGB connector and require a compatible motherboard header or controller for 16 million colour synchronisation.
The 4-pin PWM plugs fit 3-pin headers and will run, but speed will be voltage-controlled rather than PWM-regulated between 800 and 2000 RPM.
Each fan clicks into the next via the slide-in pin mechanism; a single cable runs the whole cluster, and all three fans spin and light together when powered.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?