Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Jungle Leopard
Three white 120 mm case fans with reverse blades, hydraulic bearings, 5 V ARGB lighting and PWM control up to 2000 RPM
Color White Reverse
This pack contains three 120 mm case fans with hydraulic bearings and a 25 mm frame. Each unit spins at up to 2000 RPM and delivers 62.36 CFM of airflow at 2.21 mmAq static pressure. The 4-pin PWM connector allows speed control between 800 and 2000 RPM. Addressable RGB lighting runs on a standard 5 V 3-pin header.
The daisy-chain slide-in locking system lets the three fans share a single power and signal cable, reducing internal clutter. Users who want independent fan curves per unit or who rely on 12 V RGB headers should consider a different kit. The white frame and black blades suit light-themed builds but may clash with all-black interiors.
Interlocking pins join the fans mechanically and electrically, so only one cable reaches the motherboard. PWM control adjusts speed automatically with CPU temperature, while 5 V ARGB sync works with major board vendors for 16 million colours. Hydraulic bearings and eight damping pads keep noise at 29 dBA.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Yes, the fans use a 5V 3-pin ARGB connector and require a compatible motherboard header or controller for 16 million colour synchronisation.
The 4-pin PWM plugs fit 3-pin headers and will run, but speed will be voltage-controlled rather than PWM-regulated between 800 and 2000 RPM.
Each fan clicks into the next via the slide-in pin mechanism; a single cable runs the whole cluster, and all three fans spin and light together when powered.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?