Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3 Pack White
- 3 Fans
- Case Fan
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Jungle Leopard
Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA
Color Black Forward
This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.
The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.
At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.
PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.
Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?