Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3 Pack White
- 3 Fans
- Case Fan
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Jungle Leopard
Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA
Color Black Forward
This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.
The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.
At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.
PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.
Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?