Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Jungle Leopard
Three 120 mm case fans with hydraulic bearings deliver 62.36 CFM at 29 dBA and include 5 V ARGB lighting with daisy-chain cabling
Color White Forward
This pack contains three 120 mm Galaxy case fans with hydraulic bearings and a white finish. Each unit delivers up to 62.36 CFM at 2.21 mmAq static pressure while spinning at 2000 RPM. The 5 V ARGB lighting and PWM speed control suit builders who want synchronised illumination and automatic thermal management.
The slide-in interlocking mechanism lets the three fans connect pin-to-pin so only one cable runs to the motherboard per cluster. This reduces cable clutter and shortens installation time, but the fixed spacing may not align with every case fan mount pattern. Builders with irregular hole layouts or tight clearances should verify compatibility before committing.
Lighting synchronisation requires a motherboard 5 V 3-pin ARGB header; older 12 V 4-pin RGB headers will not work. PWM control operates between 800 and 2000 RPM via a standard 4-pin fan connector, so boards lacking PWM headers lose automatic speed curves. The 29 dBA noise floor at full speed may be audible in quiet environments.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Use your motherboard BIOS or fan-control software to read the reported speed; the fans should vary between 800 and 2000 RPM depending on CPU temperature.
The box contains three 120×120×25 mm fans with hydraulic bearings; the slide-in pin-to-pin interlocking lets them daisy-chain so only one 5 V 3-pin ARGB and one 4-pin PWM cable are required for the whole cluster.
Both colours share identical specs — 62.36 CFM airflow, 2.21 mmAq pressure and 29 dBA noise — so pick the colour that matches your case aesthetic.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?