Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Jungle Leopard
Three 120 mm case fans with hydraulic bearings deliver 62.36 CFM at 29 dBA and include 5 V ARGB lighting with daisy-chain cabling
Color White Forward
This pack contains three 120 mm Galaxy case fans with hydraulic bearings and a white finish. Each unit delivers up to 62.36 CFM at 2.21 mmAq static pressure while spinning at 2000 RPM. The 5 V ARGB lighting and PWM speed control suit builders who want synchronised illumination and automatic thermal management.
The slide-in interlocking mechanism lets the three fans connect pin-to-pin so only one cable runs to the motherboard per cluster. This reduces cable clutter and shortens installation time, but the fixed spacing may not align with every case fan mount pattern. Builders with irregular hole layouts or tight clearances should verify compatibility before committing.
Lighting synchronisation requires a motherboard 5 V 3-pin ARGB header; older 12 V 4-pin RGB headers will not work. PWM control operates between 800 and 2000 RPM via a standard 4-pin fan connector, so boards lacking PWM headers lose automatic speed curves. The 29 dBA noise floor at full speed may be audible in quiet environments.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Use your motherboard BIOS or fan-control software to read the reported speed; the fans should vary between 800 and 2000 RPM depending on CPU temperature.
The box contains three 120×120×25 mm fans with hydraulic bearings; the slide-in pin-to-pin interlocking lets them daisy-chain so only one 5 V 3-pin ARGB and one 4-pin PWM cable are required for the whole cluster.
Both colours share identical specs — 62.36 CFM airflow, 2.21 mmAq pressure and 29 dBA noise — so pick the colour that matches your case aesthetic.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?