Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black
- 3 Fans
- Case Fan
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Jungle Leopard
Three 120 mm case fans with hydraulic bearings deliver 62.36 CFM at 29 dBA and include 5 V ARGB lighting with daisy-chain cabling
Color White Forward
This pack contains three 120 mm Galaxy case fans with hydraulic bearings and a white finish. Each unit delivers up to 62.36 CFM at 2.21 mmAq static pressure while spinning at 2000 RPM. The 5 V ARGB lighting and PWM speed control suit builders who want synchronised illumination and automatic thermal management.
The slide-in interlocking mechanism lets the three fans connect pin-to-pin so only one cable runs to the motherboard per cluster. This reduces cable clutter and shortens installation time, but the fixed spacing may not align with every case fan mount pattern. Builders with irregular hole layouts or tight clearances should verify compatibility before committing.
Lighting synchronisation requires a motherboard 5 V 3-pin ARGB header; older 12 V 4-pin RGB headers will not work. PWM control operates between 800 and 2000 RPM via a standard 4-pin fan connector, so boards lacking PWM headers lose automatic speed curves. The 29 dBA noise floor at full speed may be audible in quiet environments.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Use your motherboard BIOS or fan-control software to read the reported speed; the fans should vary between 800 and 2000 RPM depending on CPU temperature.
The box contains three 120×120×25 mm fans with hydraulic bearings; the slide-in pin-to-pin interlocking lets them daisy-chain so only one 5 V 3-pin ARGB and one 4-pin PWM cable are required for the whole cluster.
Both colours share identical specs — 62.36 CFM airflow, 2.21 mmAq pressure and 29 dBA noise — so pick the colour that matches your case aesthetic.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?