Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White
- 3 Fans
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Jungle Leopard
Three 120 mm hydraulic-bearing fans with daisy-chain ARGB and infinity-mirror lighting deliver 68 CFM at under 32 dB(A)
Color White-Forward
This triple pack delivers three 120 mm case fans with infinity mirror lighting and a dedicated controller. Each unit uses a hydraulic bearing and a 4-pin PWM connector for automatic speed control. The daisy-chain interlocking design lets the fans snap together with a single cable per cluster, reducing internal wiring clutter. The white frame and black blades suit clean, light-themed builds.
The kit suits anyone adding a 360 mm radiator or filling three 120 mm mounts who prefers one controller and minimal cabling. It is less suited for systems limited to 3-pin voltage control only, or for users who need fans thinner than 25 mm for tight clearances. Buyers requiring higher static pressure than 2.4 mmH₂O should evaluate other options.
At maximum speed each fan moves 68 CFM while producing less than 32 dB(A) and 2.4 mmH₂O of pressure. The 900–1850 RPM range lets the curve stay quiet at idle and ramp for heavy loads. This airflow figure is the primary metric to match against your case or radiator restriction.
| Brand | Jungle Leopard |
|---|---|
| Series | Interstellar |
| Model | Interstellar V2 |
| Part Number | Interstellar V2 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 900-1850RPM |
| Air Flow | 68CFM |
| Air Pressure | 2.4mmH20 |
| Noise Level | <32dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The hydraulic-bearing fans stay below 32 dB(A) at full speed, and the eight damping pads cut resonance down to about 29 dB(A) in typical use.
Each fan uses a standard 4-pin PWM connector for power and a 3-pin 5 V ARGB header for lighting; the pack includes a dedicated controller if your board lacks enough headers.
Yes — the 120×120×25 mm dimensions match standard 360 mm radiator mounts, and the 2.4 mmH₂O static pressure works well in push or pull configurations with existing fans.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?