Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Three white 120mm case fans with infinity mirror centres and daisy-chain cables, shown with a small ARGB controller

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Case Fan White 3-Pack

SKU CH-AMQJ-81BY8

Three 120 mm hydraulic-bearing fans with daisy-chain ARGB and infinity-mirror lighting deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White-Forward

  • Strong cooling from 68CFM airflow at 1850RPM
  • Quiet operation below 32dB(A) with hydraulic bearing
  • Daisy-chain slide-in design uses one cable per cluster
  • Infinity mirror lighting on each 120mm fan frame
  • Vibration-damping pads cut resonance to 29dBA

Three-Fan ARGB Kit

This triple pack delivers three 120 mm case fans with infinity mirror lighting and a dedicated controller. Each unit uses a hydraulic bearing and a 4-pin PWM connector for automatic speed control. The daisy-chain interlocking design lets the fans snap together with a single cable per cluster, reducing internal wiring clutter. The white frame and black blades suit clean, light-themed builds.

Builders Who Want Simple RGB Cooling

The kit suits anyone adding a 360 mm radiator or filling three 120 mm mounts who prefers one controller and minimal cabling. It is less suited for systems limited to 3-pin voltage control only, or for users who need fans thinner than 25 mm for tight clearances. Buyers requiring higher static pressure than 2.4 mmH₂O should evaluate other options.

68 CFM at 1850 RPM

At maximum speed each fan moves 68 CFM while producing less than 32 dB(A) and 2.4 mmH₂O of pressure. The 900–1850 RPM range lets the curve stay quiet at idle and ramp for heavy loads. This airflow figure is the primary metric to match against your case or radiator restriction.

Prednosti

  • Strong cooling from 68CFM airflow at 1850RPM
  • Quiet operation below 32dB(A) with hydraulic bearing
  • Daisy-chain slide-in design uses one cable per cluster
  • Infinity mirror lighting on each 120mm fan frame
  • Vibration-damping pads cut resonance to 29dBA

Špecifikácie

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How loud are these 120 mm fans when they run at the 1850 RPM maximum all day?

The hydraulic-bearing fans stay below 32 dB(A) at full speed, and the eight damping pads cut resonance down to about 29 dB(A) in typical use.

What motherboard header or separate controller do I need to run the three-fan daisy-chain and ARGB lighting?

Each fan uses a standard 4-pin PWM connector for power and a 3-pin 5 V ARGB header for lighting; the pack includes a dedicated controller if your board lacks enough headers.

Will the 25 mm thick frames and 68 CFM airflow fit and cool a 360 mm radiator alongside my older 120 mm fans?

Yes — the 120×120×25 mm dimensions match standard 360 mm radiator mounts, and the 2.4 mmH₂O static pressure works well in push or pull configurations with existing fans.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.