Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Three white 120mm case fans with infinity mirror centres and daisy-chain cables, shown with a small ARGB controller

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Case Fan White 3-Pack

SKU CH-AMQJ-81BY8

Three 120 mm hydraulic-bearing fans with daisy-chain ARGB and infinity-mirror lighting deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White-Forward

  • Strong cooling from 68CFM airflow at 1850RPM
  • Quiet operation below 32dB(A) with hydraulic bearing
  • Daisy-chain slide-in design uses one cable per cluster
  • Infinity mirror lighting on each 120mm fan frame
  • Vibration-damping pads cut resonance to 29dBA

Three-Fan ARGB Kit

This triple pack delivers three 120 mm case fans with infinity mirror lighting and a dedicated controller. Each unit uses a hydraulic bearing and a 4-pin PWM connector for automatic speed control. The daisy-chain interlocking design lets the fans snap together with a single cable per cluster, reducing internal wiring clutter. The white frame and black blades suit clean, light-themed builds.

Builders Who Want Simple RGB Cooling

The kit suits anyone adding a 360 mm radiator or filling three 120 mm mounts who prefers one controller and minimal cabling. It is less suited for systems limited to 3-pin voltage control only, or for users who need fans thinner than 25 mm for tight clearances. Buyers requiring higher static pressure than 2.4 mmH₂O should evaluate other options.

68 CFM at 1850 RPM

At maximum speed each fan moves 68 CFM while producing less than 32 dB(A) and 2.4 mmH₂O of pressure. The 900–1850 RPM range lets the curve stay quiet at idle and ramp for heavy loads. This airflow figure is the primary metric to match against your case or radiator restriction.

Høydepunkter

  • Strong cooling from 68CFM airflow at 1850RPM
  • Quiet operation below 32dB(A) with hydraulic bearing
  • Daisy-chain slide-in design uses one cable per cluster
  • Infinity mirror lighting on each 120mm fan frame
  • Vibration-damping pads cut resonance to 29dBA

Spesifikasjoner

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How loud are these 120 mm fans when they run at the 1850 RPM maximum all day?

The hydraulic-bearing fans stay below 32 dB(A) at full speed, and the eight damping pads cut resonance down to about 29 dB(A) in typical use.

What motherboard header or separate controller do I need to run the three-fan daisy-chain and ARGB lighting?

Each fan uses a standard 4-pin PWM connector for power and a 3-pin 5 V ARGB header for lighting; the pack includes a dedicated controller if your board lacks enough headers.

Will the 25 mm thick frames and 68 CFM airflow fit and cool a 360 mm radiator alongside my older 120 mm fans?

Yes — the 120×120×25 mm dimensions match standard 360 mm radiator mounts, and the 2.4 mmH₂O static pressure works well in push or pull configurations with existing fans.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.