Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White
- 3 Fans
- Case Fan
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Jungle Leopard
Three 120 mm hydraulic-bearing fans deliver 68 CFM each at up to 1850 RPM while staying below 32 dB(A), and daisy-chain ARGB cables with an infinity-mirror ring keep cabling tidy
Color Black-Reverse
The Jungle Leopard Interstellar V2 triple pack delivers three 120 mm case fans in a single box. Each unit uses a hydraulic bearing and a 4-pin power connector for PWM control. The daisy-chain interlocking mechanism links fans together so only one cable runs to the motherboard or the included controller. This reduces internal clutter and speeds up installation in standard ATX cases or on 360 mm radiators.
The pack suits enthusiasts who prefer a unified ARGB loop managed through one header and a tidy interior. The reverse-blade design and infinity-mirror module create a consistent glow across all three fans. Buyers who need variable-speed fans without ARGB, or who require a different frame thickness for slim builds, should look at other options.
Each fan moves up to 68 CFM while producing less than 32 dB(A) at full speed. The bionic blade profile and eight damping pads keep resonance low even at 1850 RPM. This balance of static pressure and quiet operation decides whether the kit matches a high-airflow radiator or a silence-focused chassis.
| Brand | Jungle Leopard |
|---|---|
| Series | Interstellar |
| Model | Interstellar V2 |
| Part Number | Interstellar V2 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 900-1850RPM |
| Air Flow | 68CFM |
| Air Pressure | 2.4mmH20 |
| Noise Level | <32dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Yes, the 120×120×25mm frame matches standard 360mm radiator mounting holes, and the 4-pin PWM connector works with any motherboard header.
The infinity mirror module should display a smooth, soft ARGB cycle, and each fan's RPM should read between 900-1850RPM in BIOS or monitoring software with noise below 32dB(A).
The pack ships with three fans, a dedicated controller, and the slide-in PIN-to-PIN interlocking cables so only one cable runs to the motherboard — no extra hub required.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?