Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White
- 3 Fans
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Jungle Leopard
Three 120 mm hydraulic-bearing fans deliver 68 CFM each at up to 1850 RPM while staying below 32 dB(A), and daisy-chain ARGB cables with an infinity-mirror ring keep cabling tidy
Color Black-Reverse
The Jungle Leopard Interstellar V2 triple pack delivers three 120 mm case fans in a single box. Each unit uses a hydraulic bearing and a 4-pin power connector for PWM control. The daisy-chain interlocking mechanism links fans together so only one cable runs to the motherboard or the included controller. This reduces internal clutter and speeds up installation in standard ATX cases or on 360 mm radiators.
The pack suits enthusiasts who prefer a unified ARGB loop managed through one header and a tidy interior. The reverse-blade design and infinity-mirror module create a consistent glow across all three fans. Buyers who need variable-speed fans without ARGB, or who require a different frame thickness for slim builds, should look at other options.
Each fan moves up to 68 CFM while producing less than 32 dB(A) at full speed. The bionic blade profile and eight damping pads keep resonance low even at 1850 RPM. This balance of static pressure and quiet operation decides whether the kit matches a high-airflow radiator or a silence-focused chassis.
| Brand | Jungle Leopard |
|---|---|
| Series | Interstellar |
| Model | Interstellar V2 |
| Part Number | Interstellar V2 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 900-1850RPM |
| Air Flow | 68CFM |
| Air Pressure | 2.4mmH20 |
| Noise Level | <32dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the 120×120×25mm frame matches standard 360mm radiator mounting holes, and the 4-pin PWM connector works with any motherboard header.
The infinity mirror module should display a smooth, soft ARGB cycle, and each fan's RPM should read between 900-1850RPM in BIOS or monitoring software with noise below 32dB(A).
The pack ships with three fans, a dedicated controller, and the slide-in PIN-to-PIN interlocking cables so only one cable runs to the motherboard — no extra hub required.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?