KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
KingSpec
Compact M.2 2242 SATA SSD delivering 1 TB capacity with sequential reads up to 570 MB/s and writes up to 540 MB/s for faster boot and app loading
Model NT-1TB-2242
The KingSpec NT-1TB-2242 is a 1TB internal solid-state drive built in the M.2 2242 form factor. It connects through a SATA interface and uses 3D NAND flash memory. The drive is designed for consumer desktops, laptops and ultrabooks that accept a 22 mm by 42 mm SATA module.
This drive fits systems with an M.2 slot wired for SATA signalling, such as certain Lenovo ThinkPad, HP ProBook and ASUS Vivobook models. It delivers sequential reads up to 570 MBps and writes up to 540 MBps with random performance of 24,300 read IOPS and 6,400 write IOPS. Devices limited to PCIe signalling cannot use this module.
The decisive specification is the SATA interface combined with the 2242 dimensions. Buyers must verify their motherboard or laptop provides a SATA-wired M.2 slot of this length; a PCIe-only slot will not work. Power draw is 0.58 W idle and 1.5 W active, with an operating range of 0 °C to 70 °C.
| Brand | KingSpec |
|---|---|
| Series | NT 2242 Series |
| Model | NT-1TB-2242 |
| Part Number | NT-1TB-2242 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2242 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA NGFF |
| Max Sequential Read | Up to 570 MBps |
| Max Sequential Write | Up to 540 MBps |
| 4KB Random Read | Up to 24,300 IOPS |
| 4KB Random Write | Up to 6,400 IOPS |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.58W |
| Power Consumption (Active) | 1.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5%-95% RH non-condensing |
| Height | 42.0mm |
| Width | 22.0mm |
| Depth | 3.50mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive is supplied as a bare M.2 2242 module. A mounting screw and any adapter bracket are not included and must be sourced separately.
This model is offered in a single 1TB capacity, so no capacity selection is required.
It represents the peak SATA 6 Gbps throughput for large file transfers; real-world speeds will be lower depending on the system and workload.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?