KingSpec XF-512-2280 512GB M.2 NVMe 4.0 internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
KingSpec
M.2 2280 internal SSD with 2TB capacity, PCIe 4.0 x4 interface and NVMe 1.4 protocol delivering up to 4000 MB/s read and 3700 MB/s write speeds for gaming and creative workloads
Options XF-L 2TB 2280
The KingSpec XF-L 2TB M.2 2280 is an internal solid-state drive built for consumer desktops, laptops and NVMe-enabled NAS units. It targets gamers, video editors and other creative professionals who need large, fast storage for AAA titles, 4K or 8K footage and heavy project files.
The drive connects through a PCI-Express 4.0 x4 link and runs the NVMe 1.4 protocol. That interface is the single specification that decides whether the SSD will operate at its rated speed; a system limited to PCIe 3.0 will cap the throughput well below the advertised 4000 MBps read and 3700 MBps write.
The XF-L ships without a heatsink, so sustained workloads on platforms with restricted airflow — such as slim laptops or the PlayStation 5 expansion slot — may require an aftermarket heatsink to prevent thermal throttling. The supplier notes graphene heatsink compatibility and intelligent thermal algorithms, but the physical cooler is not bundled.
| Brand | KingSpec |
|---|---|
| Series | XF Series |
| Model | XF-L 2280 |
| Part Number | XF-L 2TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 4000 MBps |
| Max Sequential Write | Up to 3700 MBps |
| 4KB Random Read | Up to 715,000 IOPS |
| 4KB Random Write | Up to 890,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.36W |
| Power Consumption (Active) | 6.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80mm |
| Width | 22mm |
| Depth | 2.1mm |
| Weight | 30g |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Those are peak sequential rates over PCIe 4.0 x4; real-world game loads, OS boots and large file copies will be noticeably faster than SATA drives, though sustained throughput depends on your motherboard lane allocation and thermal headroom.
It runs on PCIe 4.0 x4 with NVMe 1.4, so the practical ceiling is the bus bandwidth of roughly 8 GB/s; the controller tops out at the quoted 4000/3700 MB/s, and performance will drop to PCIe 3.0 speeds if installed in an older slot.
It follows the M.2 2280 form factor — 80 mm long, 22 mm wide, single-sided — and fits any standard M-key slot in laptops, desktops or PS5 expansion bays; no heatsink is included, so ensure your board or console provides one.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?