KingSpec XF-512-2280 512GB M.2 NVMe 4.0 internal SSD
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
KingSpec
M.2 2280 internal SSD with 2TB capacity, PCIe 4.0 x4 interface and NVMe 1.4 protocol delivering up to 4000 MB/s read and 3700 MB/s write speeds for gaming and creative workloads
Options XF-L 2TB 2280
The KingSpec XF-L 2TB M.2 2280 is an internal solid-state drive built for consumer desktops, laptops and NVMe-enabled NAS units. It targets gamers, video editors and other creative professionals who need large, fast storage for AAA titles, 4K or 8K footage and heavy project files.
The drive connects through a PCI-Express 4.0 x4 link and runs the NVMe 1.4 protocol. That interface is the single specification that decides whether the SSD will operate at its rated speed; a system limited to PCIe 3.0 will cap the throughput well below the advertised 4000 MBps read and 3700 MBps write.
The XF-L ships without a heatsink, so sustained workloads on platforms with restricted airflow — such as slim laptops or the PlayStation 5 expansion slot — may require an aftermarket heatsink to prevent thermal throttling. The supplier notes graphene heatsink compatibility and intelligent thermal algorithms, but the physical cooler is not bundled.
| Brand | KingSpec |
|---|---|
| Series | XF Series |
| Model | XF-L 2280 |
| Part Number | XF-L 2TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 4000 MBps |
| Max Sequential Write | Up to 3700 MBps |
| 4KB Random Read | Up to 715,000 IOPS |
| 4KB Random Write | Up to 890,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.36W |
| Power Consumption (Active) | 6.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80mm |
| Width | 22mm |
| Depth | 2.1mm |
| Weight | 30g |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Those are peak sequential rates over PCIe 4.0 x4; real-world game loads, OS boots and large file copies will be noticeably faster than SATA drives, though sustained throughput depends on your motherboard lane allocation and thermal headroom.
It runs on PCIe 4.0 x4 with NVMe 1.4, so the practical ceiling is the bus bandwidth of roughly 8 GB/s; the controller tops out at the quoted 4000/3700 MB/s, and performance will drop to PCIe 3.0 speeds if installed in an older slot.
It follows the M.2 2280 form factor — 80 mm long, 22 mm wide, single-sided — and fits any standard M-key slot in laptops, desktops or PS5 expansion bays; no heatsink is included, so ensure your board or console provides one.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?