KingSpec XF-512-2280 512GB M.2 NVMe 4.0 internal SSD
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
KingSpec
M.2 2280 internal SSD with 2TB capacity, PCIe 4.0 x4 interface and NVMe 1.4 protocol delivering up to 4000 MB/s read and 3700 MB/s write speeds for gaming and creative workloads
Options XF-L 2TB 2280
The KingSpec XF-L 2TB M.2 2280 is an internal solid-state drive built for consumer desktops, laptops and NVMe-enabled NAS units. It targets gamers, video editors and other creative professionals who need large, fast storage for AAA titles, 4K or 8K footage and heavy project files.
The drive connects through a PCI-Express 4.0 x4 link and runs the NVMe 1.4 protocol. That interface is the single specification that decides whether the SSD will operate at its rated speed; a system limited to PCIe 3.0 will cap the throughput well below the advertised 4000 MBps read and 3700 MBps write.
The XF-L ships without a heatsink, so sustained workloads on platforms with restricted airflow — such as slim laptops or the PlayStation 5 expansion slot — may require an aftermarket heatsink to prevent thermal throttling. The supplier notes graphene heatsink compatibility and intelligent thermal algorithms, but the physical cooler is not bundled.
| Brand | KingSpec |
|---|---|
| Series | XF Series |
| Model | XF-L 2280 |
| Part Number | XF-L 2TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 4000 MBps |
| Max Sequential Write | Up to 3700 MBps |
| 4KB Random Read | Up to 715,000 IOPS |
| 4KB Random Write | Up to 890,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.36W |
| Power Consumption (Active) | 6.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80mm |
| Width | 22mm |
| Depth | 2.1mm |
| Weight | 30g |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Those are peak sequential rates over PCIe 4.0 x4; real-world game loads, OS boots and large file copies will be noticeably faster than SATA drives, though sustained throughput depends on your motherboard lane allocation and thermal headroom.
It runs on PCIe 4.0 x4 with NVMe 1.4, so the practical ceiling is the bus bandwidth of roughly 8 GB/s; the controller tops out at the quoted 4000/3700 MB/s, and performance will drop to PCIe 3.0 speeds if installed in an older slot.
It follows the M.2 2280 form factor — 80 mm long, 22 mm wide, single-sided — and fits any standard M-key slot in laptops, desktops or PS5 expansion bays; no heatsink is included, so ensure your board or console provides one.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?