Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Round 1.43 inch AMOLED development board with 466×466 display and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board

SKU CH-YRYP-5H3PZ

A 1.43 inch round AMOLED touch display with 466×466 resolution and 16.7M colours runs on an ESP32-S3 with 2.4 GHz Wi-Fi and Bluetooth 5

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

Target hardware

The LORDWORLD board pairs an ESP32-S3 microcontroller with a 1.43 inch AMOLED panel that delivers 466 by 466 resolution and 16.7 million colours. A 178 degree viewing angle keeps the image readable from almost any direction, while capacitive touch adds direct input. Built-in 2.4 GHz Wi-Fi and Bluetooth 5 suit wireless IoT prototypes, wearable concepts and compact display-driven projects.

Host requirements

You need a computer that can run either the ESP-IDF framework or the Arduino IDE to compile and flash firmware. A free USB port provides power and the serial connection for programming. The development environment must support the ESP32-S3 architecture; verify that your chosen SDK version includes the necessary board definitions before starting.

Build integration

The round AMOLED module replaces a separate display and touch controller, freeing PCB space and reducing wiring in tight enclosures. Onboard interfaces expose GPIOs for sensors, actuators or additional radios, letting the board act as a complete edge node. The integrated 2.4 GHz radio handles local communication without an external module, simplifying the bill of materials for battery-powered or portable designs.

Erősségek

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

What comes in the box with the LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board?

The development board with its 1.43 inch 466 × 466 AMOLED round display, capacitive touch layer, ESP32-S3 module, and onboard multiple interfaces is supplied. A USB cable for power and programming is not included and must be purchased separately.

Which version of the LORDWORLD ESP32-S3 1.43in AMOLED board should I choose for a project needing Wi-Fi and Bluetooth?

The single version listed integrates 2.4 GHz Wi-Fi (802.11 Ax/B/G/N) with 40 MHz bandwidth and Bluetooth 5 (LE) plus Bluetooth Mesh, covering both wireless needs in one board.

What does the 466 × 466 resolution mean for the 1.43 inch AMOLED display in practice?

The 466 × 466 pixel round panel delivers 16.7M colours and a 178° viewing angle, so graphics, text and video appear sharp and vivid from almost any direction on the compact 1.43 inch screen.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.