نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Round 1.43 inch AMOLED development board with 466×466 display and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board

SKU CH-YRYP-5H3PZ

A 1.43 inch round AMOLED touch display with 466×466 resolution and 16.7M colours runs on an ESP32-S3 with 2.4 GHz Wi-Fi and Bluetooth 5

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

Target hardware

The LORDWORLD board pairs an ESP32-S3 microcontroller with a 1.43 inch AMOLED panel that delivers 466 by 466 resolution and 16.7 million colours. A 178 degree viewing angle keeps the image readable from almost any direction, while capacitive touch adds direct input. Built-in 2.4 GHz Wi-Fi and Bluetooth 5 suit wireless IoT prototypes, wearable concepts and compact display-driven projects.

Host requirements

You need a computer that can run either the ESP-IDF framework or the Arduino IDE to compile and flash firmware. A free USB port provides power and the serial connection for programming. The development environment must support the ESP32-S3 architecture; verify that your chosen SDK version includes the necessary board definitions before starting.

Build integration

The round AMOLED module replaces a separate display and touch controller, freeing PCB space and reducing wiring in tight enclosures. Onboard interfaces expose GPIOs for sensors, actuators or additional radios, letting the board act as a complete edge node. The integrated 2.4 GHz radio handles local communication without an external module, simplifying the bill of materials for battery-powered or portable designs.

أبرز المميزات

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

What comes in the box with the LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board?

The development board with its 1.43 inch 466 × 466 AMOLED round display, capacitive touch layer, ESP32-S3 module, and onboard multiple interfaces is supplied. A USB cable for power and programming is not included and must be purchased separately.

Which version of the LORDWORLD ESP32-S3 1.43in AMOLED board should I choose for a project needing Wi-Fi and Bluetooth?

The single version listed integrates 2.4 GHz Wi-Fi (802.11 Ax/B/G/N) with 40 MHz bandwidth and Bluetooth 5 (LE) plus Bluetooth Mesh, covering both wireless needs in one board.

What does the 466 × 466 resolution mean for the 1.43 inch AMOLED display in practice?

The 466 × 466 pixel round panel delivers 16.7M colours and a 178° viewing angle, so graphics, text and video appear sharp and vivid from almost any direction on the compact 1.43 inch screen.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.