Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Round 1.43 inch AMOLED development board with 466×466 display and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board

SKU CH-YRYP-5H3PZ

A 1.43 inch round AMOLED touch display with 466×466 resolution and 16.7M colours runs on an ESP32-S3 with 2.4 GHz Wi-Fi and Bluetooth 5

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

Target hardware

The LORDWORLD board pairs an ESP32-S3 microcontroller with a 1.43 inch AMOLED panel that delivers 466 by 466 resolution and 16.7 million colours. A 178 degree viewing angle keeps the image readable from almost any direction, while capacitive touch adds direct input. Built-in 2.4 GHz Wi-Fi and Bluetooth 5 suit wireless IoT prototypes, wearable concepts and compact display-driven projects.

Host requirements

You need a computer that can run either the ESP-IDF framework or the Arduino IDE to compile and flash firmware. A free USB port provides power and the serial connection for programming. The development environment must support the ESP32-S3 architecture; verify that your chosen SDK version includes the necessary board definitions before starting.

Build integration

The round AMOLED module replaces a separate display and touch controller, freeing PCB space and reducing wiring in tight enclosures. Onboard interfaces expose GPIOs for sensors, actuators or additional radios, letting the board act as a complete edge node. The integrated 2.4 GHz radio handles local communication without an external module, simplifying the bill of materials for battery-powered or portable designs.

Prednosti

  • 43 inch round AMOLED shows vivid detail at 466 × 466 resolution
  • 7 million colours with 178° viewing angle for consistent image quality
  • ESP32-S3 provides 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 connectivity
  • Supports ESP-IDF and Arduino IDE with SDKs and tutorials for rapid development
  • Multiple onboard interfaces ready for sensor and actuator integration

Špecifikácie

BrandLORDWORLD

Otázky k tomuto produktu

What comes in the box with the LORDWORLD ESP32-S3 1.43in 466×466 AMOLED Development Board?

The development board with its 1.43 inch 466 × 466 AMOLED round display, capacitive touch layer, ESP32-S3 module, and onboard multiple interfaces is supplied. A USB cable for power and programming is not included and must be purchased separately.

Which version of the LORDWORLD ESP32-S3 1.43in AMOLED board should I choose for a project needing Wi-Fi and Bluetooth?

The single version listed integrates 2.4 GHz Wi-Fi (802.11 Ax/B/G/N) with 40 MHz bandwidth and Bluetooth 5 (LE) plus Bluetooth Mesh, covering both wireless needs in one board.

What does the 466 × 466 resolution mean for the 1.43 inch AMOLED display in practice?

The 466 × 466 pixel round panel delivers 16.7M colours and a 178° viewing angle, so graphics, text and video appear sharp and vivid from almost any direction on the compact 1.43 inch screen.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.