Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Flat blue cable with wide 8i connector splitting to two 4i ends, locking latches visible

LORDWORLD

LORDWORLD MB306L-B SlimSAS 8i SFF-8654 to 2x SlimSAS 4i SFF-8654 Hard Drive Adapter 0.5M

SKU CH-KC25-AWJ4X

0.5 m SlimSAS 8i SFF-8654 to dual 4i SFF-8654 cable with locking latches, PCIe 4.0 speeds, SFF-9402 compliant for NVMe HBA/RAID cards, UL20744 certified

  • PCIe 4.0 transfer speeds supported by SFF-8654 connectors
  • 5 metre length keeps cabling tidy in dense chassis
  • Locking latch design on SlimSAS connectors prevents accidental disconnects
  • SFF-9402 compliant cable works with NVMe HBA and RAID cards
  • UL20744 certification confirms cable meets safety requirements

Connection splitter for NVMe storage

This LORDWORLD adapter splits a single SlimSAS 8i SFF-8654 port into two SlimSAS 4i SFF-8654 connections. The 0.5 metre cable links NVMe or Tri-mode HBA and RAID cards to compatible drive backplanes. Locking latches on each connector secure the link against vibration. The assembly meets SFF-9402 and UL20744 requirements.

Suits builders adding NVMe drives to a single

The Y-cable design serves installations where one 8i controller port must feed two 4i backplane inputs. It is not for systems lacking SlimSAS 8i or 4i interfaces, nor for setups that require longer cable runs than the fixed half-metre length provides.

PCIe 4.0 rated signal performance

Transfer speeds meet PCIe 4.0 specifications across the SFF-8654 connectors. This rating determines whether the adapter can sustain the bandwidth required by the connected NVMe devices.

Erősségek

  • PCIe 4.0 transfer speeds supported by SFF-8654 connectors
  • 5 metre length keeps cabling tidy in dense chassis
  • Locking latch design on SlimSAS connectors prevents accidental disconnects
  • SFF-9402 compliant cable works with NVMe HBA and RAID cards
  • UL20744 certification confirms cable meets safety requirements

Műszaki adatok

BrandLORDWORLD

Kérdések a termékről

Will the PCIe 4.0 link stay at full speed during sustained heavy I/O on the 0.5 m cable?

The 0.5 m cable is built to SFF-9402 and meets PCIe 4.0 specifications, so the electrical budget for a half-metre run preserves the 4.0 signal under continuous load.

Does the adapter generate noticeable heat or draw extra power when run all day?

It is a passive cable assembly with no active components, so it adds no measurable heat and draws no power beyond the signal lines.

Which controller cards have the matching SFF-8654 8i port this cable plugs into?

The SFF-8654 8i end fits mainstream NVMe and tri-mode HBA or RAID cards that expose an 8i SlimSAS receptacle.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.