Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Flat blue cable with wide 8i connector splitting to two 4i ends, locking latches visible

LORDWORLD

LORDWORLD MB306L-B SlimSAS 8i SFF-8654 to 2x SlimSAS 4i SFF-8654 Hard Drive Adapter 0.5M

SKU CH-KC25-AWJ4X

0.5 m SlimSAS 8i SFF-8654 to dual 4i SFF-8654 cable with locking latches, PCIe 4.0 speeds, SFF-9402 compliant for NVMe HBA/RAID cards, UL20744 certified

  • PCIe 4.0 transfer speeds supported by SFF-8654 connectors
  • 5 metre length keeps cabling tidy in dense chassis
  • Locking latch design on SlimSAS connectors prevents accidental disconnects
  • SFF-9402 compliant cable works with NVMe HBA and RAID cards
  • UL20744 certification confirms cable meets safety requirements

Connection splitter for NVMe storage

This LORDWORLD adapter splits a single SlimSAS 8i SFF-8654 port into two SlimSAS 4i SFF-8654 connections. The 0.5 metre cable links NVMe or Tri-mode HBA and RAID cards to compatible drive backplanes. Locking latches on each connector secure the link against vibration. The assembly meets SFF-9402 and UL20744 requirements.

Suits builders adding NVMe drives to a single

The Y-cable design serves installations where one 8i controller port must feed two 4i backplane inputs. It is not for systems lacking SlimSAS 8i or 4i interfaces, nor for setups that require longer cable runs than the fixed half-metre length provides.

PCIe 4.0 rated signal performance

Transfer speeds meet PCIe 4.0 specifications across the SFF-8654 connectors. This rating determines whether the adapter can sustain the bandwidth required by the connected NVMe devices.

Helstu kostir

  • PCIe 4.0 transfer speeds supported by SFF-8654 connectors
  • 5 metre length keeps cabling tidy in dense chassis
  • Locking latch design on SlimSAS connectors prevents accidental disconnects
  • SFF-9402 compliant cable works with NVMe HBA and RAID cards
  • UL20744 certification confirms cable meets safety requirements

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Will the PCIe 4.0 link stay at full speed during sustained heavy I/O on the 0.5 m cable?

The 0.5 m cable is built to SFF-9402 and meets PCIe 4.0 specifications, so the electrical budget for a half-metre run preserves the 4.0 signal under continuous load.

Does the adapter generate noticeable heat or draw extra power when run all day?

It is a passive cable assembly with no active components, so it adds no measurable heat and draws no power beyond the signal lines.

Which controller cards have the matching SFF-8654 8i port this cable plugs into?

The SFF-8654 8i end fits mainstream NVMe and tri-mode HBA or RAID cards that expose an 8i SlimSAS receptacle.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.