LORDWORLD
LORDWORLD MB306L-B SlimSAS 8i SFF-8654 to 2x SlimSAS 4i SFF-8654 Hard Drive Adapter 0.5M
0.5 m SlimSAS 8i SFF-8654 to dual 4i SFF-8654 cable with locking latches, PCIe 4.0 speeds, SFF-9402 compliant for NVMe HBA/RAID cards, UL20744 certified
- PCIe 4.0 transfer speeds supported by SFF-8654 connectors
- 5 metre length keeps cabling tidy in dense chassis
- Locking latch design on SlimSAS connectors prevents accidental disconnects
- SFF-9402 compliant cable works with NVMe HBA and RAID cards
- UL20744 certification confirms cable meets safety requirements
Connection splitter for NVMe storage
This LORDWORLD adapter splits a single SlimSAS 8i SFF-8654 port into two SlimSAS 4i SFF-8654 connections. The 0.5 metre cable links NVMe or Tri-mode HBA and RAID cards to compatible drive backplanes. Locking latches on each connector secure the link against vibration. The assembly meets SFF-9402 and UL20744 requirements.
Suits builders adding NVMe drives to a single
The Y-cable design serves installations where one 8i controller port must feed two 4i backplane inputs. It is not for systems lacking SlimSAS 8i or 4i interfaces, nor for setups that require longer cable runs than the fixed half-metre length provides.
PCIe 4.0 rated signal performance
Transfer speeds meet PCIe 4.0 specifications across the SFF-8654 connectors. This rating determines whether the adapter can sustain the bandwidth required by the connected NVMe devices.
Besonderheiten
- PCIe 4.0 transfer speeds supported by SFF-8654 connectors
- 5 metre length keeps cabling tidy in dense chassis
- Locking latch design on SlimSAS connectors prevents accidental disconnects
- SFF-9402 compliant cable works with NVMe HBA and RAID cards
- UL20744 certification confirms cable meets safety requirements
Technische Daten
| Brand | LORDWORLD |
|---|
Fragen zu diesem Artikel
Will the PCIe 4.0 link stay at full speed during sustained heavy I/O on the 0.5 m cable?
The 0.5 m cable is built to SFF-9402 and meets PCIe 4.0 specifications, so the electrical budget for a half-metre run preserves the 4.0 signal under continuous load.
Does the adapter generate noticeable heat or draw extra power when run all day?
It is a passive cable assembly with no active components, so it adds no measurable heat and draws no power beyond the signal lines.
Which controller cards have the matching SFF-8654 8i port this cable plugs into?
The SFF-8654 8i end fits mainstream NVMe and tri-mode HBA or RAID cards that expose an 8i SlimSAS receptacle.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00050145BTC
Auf Lager