Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Grey plastic DIN-rail power supply, 105 mm wide, with screw terminals and LED indicator

myVolts

myVolts HDR-150-15 150W DIN Rail Power Supply

SKU CH-9XZR-TZ4V8

A 150W DIN rail power supply delivering 15V at 8.55A with universal 85-264VAC input and 90.5% efficiency

  • TypeAT
  • Space-saving 105 mm ultra-slim DIN rail width
  • Universal 85–264 VAC input with 277 VAC operational tolerance
  • High 90.5 % efficiency for cooler cabinet operation
  • Wide -30 °C to 70 °C ambient temperature range
  • Comprehensive short-circuit, overload and over-voltage protection

Industrial DIN Rail Power Supply

The myVolts HDR-150-15 is a 150W DIN rail power supply built for household automation, building control and industrial machinery. It delivers a fixed 15V output at 8.55A from a universal 85 to 264VAC input. The unit carries IEC62368-1, UL62368-1, UL61010 and EN61558-2-16 certifications for home and industrial apparatus. A plastic housing prevents electrical hazards while an LED indicates power-on status.

Cabinet Integration Requirements

The ultra-slim 105mm (6SU) width saves space inside electrical cabinets and mounts on standard TS-35/7.5 or TS-35/15 rails. Cooling relies on free air convection so adequate airflow around the unit is required. The DC output voltage is adjustable and no-load power consumption stays below 0.3W. Built-in protections cover short circuit, overload and over-voltage events. Operating temperature range spans -30 to 70 degrees Celsius.

Automation Engineers and Panel Builders

This supply suits engineers wiring building automation, factory control systems or electro-mechanical apparatus that need a certified 15V 150W source on a DIN rail. Buyers who need a different output voltage such as 12V, 24V or 48V should select the matching HDR-150 variant. Installations requiring forced-air cooling, redundant supplies or battery-backup integration will need additional equipment not provided here.

Erősségek

  • Space-saving 105 mm ultra-slim DIN rail width
  • Universal 85–264 VAC input with 277 VAC operational tolerance
  • High 90.5 % efficiency for cooler cabinet operation
  • Wide -30 °C to 70 °C ambient temperature range
  • Comprehensive short-circuit, overload and over-voltage protection

Műszaki adatok

TypeAT

Kérdések a termékről

What is the first limit reached under sustained load?

The unit delivers up to 150 W at 15 V and 8.55 A before overload protection activates.

How much heat and noise does it produce when running continuously?

Fanless convection cooling keeps it silent; the plastic housing operates from -30 °C to 70 °C ambient at up to 90.5 % efficiency.

What mounting hardware is required before installation?

A standard TS-35 DIN rail, either 7.5 mm or 15 mm profile, is needed to clip the 105 mm wide supply in place.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.