Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey plastic DIN-rail power supply, 105 mm wide, with screw terminals and LED indicator

myVolts

myVolts HDR-150-15 150W DIN Rail Power Supply

SKU CH-9XZR-TZ4V8

A 150W DIN rail power supply delivering 15V at 8.55A with universal 85-264VAC input and 90.5% efficiency

  • TypeAT
  • Space-saving 105 mm ultra-slim DIN rail width
  • Universal 85–264 VAC input with 277 VAC operational tolerance
  • High 90.5 % efficiency for cooler cabinet operation
  • Wide -30 °C to 70 °C ambient temperature range
  • Comprehensive short-circuit, overload and over-voltage protection

Industrial DIN Rail Power Supply

The myVolts HDR-150-15 is a 150W DIN rail power supply built for household automation, building control and industrial machinery. It delivers a fixed 15V output at 8.55A from a universal 85 to 264VAC input. The unit carries IEC62368-1, UL62368-1, UL61010 and EN61558-2-16 certifications for home and industrial apparatus. A plastic housing prevents electrical hazards while an LED indicates power-on status.

Cabinet Integration Requirements

The ultra-slim 105mm (6SU) width saves space inside electrical cabinets and mounts on standard TS-35/7.5 or TS-35/15 rails. Cooling relies on free air convection so adequate airflow around the unit is required. The DC output voltage is adjustable and no-load power consumption stays below 0.3W. Built-in protections cover short circuit, overload and over-voltage events. Operating temperature range spans -30 to 70 degrees Celsius.

Automation Engineers and Panel Builders

This supply suits engineers wiring building automation, factory control systems or electro-mechanical apparatus that need a certified 15V 150W source on a DIN rail. Buyers who need a different output voltage such as 12V, 24V or 48V should select the matching HDR-150 variant. Installations requiring forced-air cooling, redundant supplies or battery-backup integration will need additional equipment not provided here.

Kohokohdat

  • Space-saving 105 mm ultra-slim DIN rail width
  • Universal 85–264 VAC input with 277 VAC operational tolerance
  • High 90.5 % efficiency for cooler cabinet operation
  • Wide -30 °C to 70 °C ambient temperature range
  • Comprehensive short-circuit, overload and over-voltage protection

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What is the first limit reached under sustained load?

The unit delivers up to 150 W at 15 V and 8.55 A before overload protection activates.

How much heat and noise does it produce when running continuously?

Fanless convection cooling keeps it silent; the plastic housing operates from -30 °C to 70 °C ambient at up to 90.5 % efficiency.

What mounting hardware is required before installation?

A standard TS-35 DIN rail, either 7.5 mm or 15 mm profile, is needed to clip the 105 mm wide supply in place.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.