OEM Industries
OEM Industries KD1206PHB3 60mm 12V 1.2W 3-pin fan
A 60 mm square cooler with a 12 V, 1.2 W ball-bearing fan and three-pin connector
- ColorBlack
- TypeFan only
- Fan Size60mm
- Bearing TypeBall
- LEDNo
- 60 mm square frame fits tight spaces
- 15 mm slim profile clears low-profile builds
- 12 V 1.2 W draw keeps power use low
- 3-pin connector enables speed monitoring
- ball bearing design extends service life
Compact 60 mm CPU cooler
The OEM Industries KD1206PHB3 is a square 60 mm by 15 mm fan-only cooler designed for small-form-factor systems that need a low-profile air solution. It draws 1.2 W from a 12 V three-pin header and uses a ball bearing for durable operation without LEDs.
Three-pin voltage control limit
The three-pin connector allows speed regulation only through voltage changes, so the fan cannot respond to PWM signals from modern motherboard headers. Builders who rely on four-pin PWM curves will not get automatic low-speed idle behaviour from this unit.
Simple clip or screw mounting
Installation typically involves aligning the 60 mm square frame with the corresponding mounting holes or clips on the socket bracket. The main issue arises when the board layout places capacitors or VRM heatsinks too close to the socket, preventing the cooler from seating flush.
Erősségek
- 60 mm square frame fits tight spaces
- 15 mm slim profile clears low-profile builds
- 12 V 1.2 W draw keeps power use low
- 3-pin connector enables speed monitoring
- ball bearing design extends service life
Műszaki adatok
| Model | KD1206PHB3 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| LED | No |
Kérdések a termékről
Should I pick the 60 mm square cooler or a different height for my build?
This model is a 60 mm square cooler with a 15 mm thickness, so verify your case clearance and mounting holes match those dimensions before buying.
What does the 1.2 W rating tell me about actual cooling performance?
The 1.2 W power draw at 12 V indicates modest airflow suited for low-heat CPUs or auxiliary case ventilation rather than high thermal loads.
Will the 3-pin connector limit speed control on a modern motherboard?
The 3-pin connector supports voltage-based speed control; PWM precision requires a 4-pin header, so check your board's fan headers for compatibility.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001042BTC
Raktáron