Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 60mm square CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KD1206PHB3 60mm 12V 1.2W 3-pin fan

SKU CH-3P8F-MDXR5

A 60 mm square cooler with a 12 V, 1.2 W ball-bearing fan and three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • LEDNo
  • 60 mm square frame fits tight spaces
  • 15 mm slim profile clears low-profile builds
  • 12 V 1.2 W draw keeps power use low
  • 3-pin connector enables speed monitoring
  • ball bearing design extends service life

Compact 60 mm CPU cooler

The OEM Industries KD1206PHB3 is a square 60 mm by 15 mm fan-only cooler designed for small-form-factor systems that need a low-profile air solution. It draws 1.2 W from a 12 V three-pin header and uses a ball bearing for durable operation without LEDs.

Three-pin voltage control limit

The three-pin connector allows speed regulation only through voltage changes, so the fan cannot respond to PWM signals from modern motherboard headers. Builders who rely on four-pin PWM curves will not get automatic low-speed idle behaviour from this unit.

Simple clip or screw mounting

Installation typically involves aligning the 60 mm square frame with the corresponding mounting holes or clips on the socket bracket. The main issue arises when the board layout places capacitors or VRM heatsinks too close to the socket, preventing the cooler from seating flush.

Pluspunten

  • 60 mm square frame fits tight spaces
  • 15 mm slim profile clears low-profile builds
  • 12 V 1.2 W draw keeps power use low
  • 3-pin connector enables speed monitoring
  • ball bearing design extends service life

Specificaties

ModelKD1206PHB3
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
LEDNo

Vragen over dit artikel

Should I pick the 60 mm square cooler or a different height for my build?

This model is a 60 mm square cooler with a 15 mm thickness, so verify your case clearance and mounting holes match those dimensions before buying.

What does the 1.2 W rating tell me about actual cooling performance?

The 1.2 W power draw at 12 V indicates modest airflow suited for low-heat CPUs or auxiliary case ventilation rather than high thermal loads.

Will the 3-pin connector limit speed control on a modern motherboard?

The 3-pin connector supports voltage-based speed control; PWM precision requires a 4-pin header, so check your board's fan headers for compatibility.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.