Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 60mm square CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KD1206PHB3 60mm 12V 1.2W 3-pin fan

SKU CH-3P8F-MDXR5

A 60 mm square cooler with a 12 V, 1.2 W ball-bearing fan and three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • LEDNo
  • 60 mm square frame fits tight spaces
  • 15 mm slim profile clears low-profile builds
  • 12 V 1.2 W draw keeps power use low
  • 3-pin connector enables speed monitoring
  • ball bearing design extends service life

Compact 60 mm CPU cooler

The OEM Industries KD1206PHB3 is a square 60 mm by 15 mm fan-only cooler designed for small-form-factor systems that need a low-profile air solution. It draws 1.2 W from a 12 V three-pin header and uses a ball bearing for durable operation without LEDs.

Three-pin voltage control limit

The three-pin connector allows speed regulation only through voltage changes, so the fan cannot respond to PWM signals from modern motherboard headers. Builders who rely on four-pin PWM curves will not get automatic low-speed idle behaviour from this unit.

Simple clip or screw mounting

Installation typically involves aligning the 60 mm square frame with the corresponding mounting holes or clips on the socket bracket. The main issue arises when the board layout places capacitors or VRM heatsinks too close to the socket, preventing the cooler from seating flush.

Priekšrocības

  • 60 mm square frame fits tight spaces
  • 15 mm slim profile clears low-profile builds
  • 12 V 1.2 W draw keeps power use low
  • 3-pin connector enables speed monitoring
  • ball bearing design extends service life

Specifikācijas

ModelKD1206PHB3
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
LEDNo

Jautājumi par šo preci

Should I pick the 60 mm square cooler or a different height for my build?

This model is a 60 mm square cooler with a 15 mm thickness, so verify your case clearance and mounting holes match those dimensions before buying.

What does the 1.2 W rating tell me about actual cooling performance?

The 1.2 W power draw at 12 V indicates modest airflow suited for low-heat CPUs or auxiliary case ventilation rather than high thermal loads.

Will the 3-pin connector limit speed control on a modern motherboard?

The 3-pin connector supports voltage-based speed control; PWM precision requires a 4-pin header, so check your board's fan headers for compatibility.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.