OEM Industries
OEM Industries KDE1208PTV1 80mm 12V 1.8W 3-pin CPU cooler
80 mm square CPU cooler with ball-bearing fan, 12 V 1.8 W power draw and 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 80 mm square frame fits tight CPU spaces
- Ball bearing motor reduces wear for longer service life
- 12 V 1.8 W draw keeps power use low
- Three-pin connector enables speed monitoring on standard headers
- SUNON 8025 KDE1208PTV1 design built for case and CPU cooling
80 mm 12 V Ball-Bearing Fan
This OEM Industries cooler is a square 80 mm fan designed for CPU or case airflow. It runs on 12 V and draws 1.8 W through a standard three-pin connector. The unit suits builders replacing a worn 80 mm cooler or fitting a compact chassis that accepts this footprint.
Three-Pin 12 V Power Connector
The single specification that decides fit is the three-pin 12 V connector. It must match the motherboard or fan-controller header you intend to use. If your board only offers four-pin PWM headers without voltage control, speed regulation will not work as expected.
Ball Bearing 1.8 W Operation
Ball-bearing construction provides consistent rotation at the rated 1.8 W power draw. The low wattage keeps heat output minimal and acoustic levels modest in normal use. No LED lighting is present, so the fan runs dark inside the case.
Erősségek
- 80 mm square frame fits tight CPU spaces
- Ball bearing motor reduces wear for longer service life
- 12 V 1.8 W draw keeps power use low
- Three-pin connector enables speed monitoring on standard headers
- SUNON 8025 KDE1208PTV1 design built for case and CPU cooling
Műszaki adatok
| Model | KDE1208PTV1 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Kérdések a termékről
What does the 1.8 W power draw mean once the fan is installed?
At 1.8 W the fan draws very little current from the motherboard header, so it will not overload a standard 3-pin CPU fan connector.
What does the 3-pin connector limit in practice?
The 3-pin connector provides power and a tachometer signal but no PWM wire, so speed is controlled by voltage rather than a digital duty cycle.
What clearance does the 80 mm square frame need to fit?
The cooler requires an 80 mm by 80 mm mounting area with holes spaced for the standard 8025 pattern.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001041BTC
Raktáron