Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 80mm square CPU cooler fan with 3-pin connector

OEM Industries

OEM Industries KDE1208PTV1 80mm 12V 1.8W 3-pin CPU cooler

SKU CH-Z3DC-PGCXH

80 mm square CPU cooler with ball-bearing fan, 12 V 1.8 W power draw and 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80 mm square frame fits tight CPU spaces
  • Ball bearing motor reduces wear for longer service life
  • 12 V 1.8 W draw keeps power use low
  • Three-pin connector enables speed monitoring on standard headers
  • SUNON 8025 KDE1208PTV1 design built for case and CPU cooling

80 mm 12 V Ball-Bearing Fan

This OEM Industries cooler is a square 80 mm fan designed for CPU or case airflow. It runs on 12 V and draws 1.8 W through a standard three-pin connector. The unit suits builders replacing a worn 80 mm cooler or fitting a compact chassis that accepts this footprint.

Three-Pin 12 V Power Connector

The single specification that decides fit is the three-pin 12 V connector. It must match the motherboard or fan-controller header you intend to use. If your board only offers four-pin PWM headers without voltage control, speed regulation will not work as expected.

Ball Bearing 1.8 W Operation

Ball-bearing construction provides consistent rotation at the rated 1.8 W power draw. The low wattage keeps heat output minimal and acoustic levels modest in normal use. No LED lighting is present, so the fan runs dark inside the case.

Priekšrocības

  • 80 mm square frame fits tight CPU spaces
  • Ball bearing motor reduces wear for longer service life
  • 12 V 1.8 W draw keeps power use low
  • Three-pin connector enables speed monitoring on standard headers
  • SUNON 8025 KDE1208PTV1 design built for case and CPU cooling

Specifikācijas

ModelKDE1208PTV1
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Jautājumi par šo preci

What does the 1.8 W power draw mean once the fan is installed?

At 1.8 W the fan draws very little current from the motherboard header, so it will not overload a standard 3-pin CPU fan connector.

What does the 3-pin connector limit in practice?

The 3-pin connector provides power and a tachometer signal but no PWM wire, so speed is controlled by voltage rather than a digital duty cycle.

What clearance does the 80 mm square frame need to fit?

The cooler requires an 80 mm by 80 mm mounting area with holes spaced for the standard 8025 pattern.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.