Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 80mm square CPU cooler fan with 3-pin connector

OEM Industries

OEM Industries KDE1208PTV1 80mm 12V 1.8W 3-pin CPU cooler

SKU CH-Z3DC-PGCXH

80 mm square CPU cooler with ball-bearing fan, 12 V 1.8 W power draw and 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 80 mm square frame fits tight CPU spaces
  • Ball bearing motor reduces wear for longer service life
  • 12 V 1.8 W draw keeps power use low
  • Three-pin connector enables speed monitoring on standard headers
  • SUNON 8025 KDE1208PTV1 design built for case and CPU cooling

80 mm 12 V Ball-Bearing Fan

This OEM Industries cooler is a square 80 mm fan designed for CPU or case airflow. It runs on 12 V and draws 1.8 W through a standard three-pin connector. The unit suits builders replacing a worn 80 mm cooler or fitting a compact chassis that accepts this footprint.

Three-Pin 12 V Power Connector

The single specification that decides fit is the three-pin 12 V connector. It must match the motherboard or fan-controller header you intend to use. If your board only offers four-pin PWM headers without voltage control, speed regulation will not work as expected.

Ball Bearing 1.8 W Operation

Ball-bearing construction provides consistent rotation at the rated 1.8 W power draw. The low wattage keeps heat output minimal and acoustic levels modest in normal use. No LED lighting is present, so the fan runs dark inside the case.

Öne çıkanlar

  • 80 mm square frame fits tight CPU spaces
  • Ball bearing motor reduces wear for longer service life
  • 12 V 1.8 W draw keeps power use low
  • Three-pin connector enables speed monitoring on standard headers
  • SUNON 8025 KDE1208PTV1 design built for case and CPU cooling

Teknik özellikler

ModelKDE1208PTV1
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Bu ürünle ilgili sorular

What does the 1.8 W power draw mean once the fan is installed?

At 1.8 W the fan draws very little current from the motherboard header, so it will not overload a standard 3-pin CPU fan connector.

What does the 3-pin connector limit in practice?

The 3-pin connector provides power and a tachometer signal but no PWM wire, so speed is controlled by voltage rather than a digital duty cycle.

What clearance does the 80 mm square frame need to fit?

The cooler requires an 80 mm by 80 mm mounting area with holes spaced for the standard 8025 pattern.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.