OEM Industries
OEM Industries SF30C-12 30mm 12V 0.06A 2 Pin Micro Fan
30 mm ball-bearing micro fan runs on 12 V at 0.06 A with a two-pin connector
- ColorBlack
- TypeFan only
- Fan Size30mm
- Bearing TypeBall
- Power Connector2 Pin
- Compact 30 mm micro fan fits tight Raspberry Pi cases
- 12 V 0.06 A draw keeps power use minimal
- Ball bearing design extends operating life
- Two-pin connector enables simple plug-in installation
- Black low-profile frame blends with board aesthetics
Compact 30 mm Micro Fan for Tight Builds
The OEM Industries SF30C-12 is a 30 mm square micro fan that runs on 12 V and draws 0.06 A through a two-pin connector. Its ball bearing and 30 mm frame suit small-form-factor cases, embedded boards and similar space-constrained cooling tasks.
Suited for Low-Profile Airflow.
Makers adding spot cooling to a Raspberry Pi or similar single-board computer will find the dimensions and voltage a direct match. Builders who need strong static pressure for dense heatsinks or high-wattage CPUs should look at larger fans with higher airflow ratings.
Handles Modest Heat Loads in Confined Spaces
The fan moves enough air for low-power SoCs, router boards or auxiliary component cooling where space is at a premium. It runs out of headroom when tasked with cooling a mainstream desktop processor or any load that demands sustained high-volume airflow.
Erősségek
- Compact 30 mm micro fan fits tight Raspberry Pi cases
- 12 V 0.06 A draw keeps power use minimal
- Ball bearing design extends operating life
- Two-pin connector enables simple plug-in installation
- Black low-profile frame blends with board aesthetics
Műszaki adatok
| Model | SF30C-12 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 30mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
Kérdések a termékről
What power supply must I already have to run the 12 V SF30C-12 fan?
You need a source that can deliver 12 V at least 0.06 A; the fan draws 12 V and 0.06 A from its 2 pin connector.
Can the 30 mm ball bearing fan fit in the same space as an older 30 mm sleeve bearing unit?
Yes, the SF30C-12 shares the 30 mm frame size, so it occupies the same mounting footprint as other 30 mm fans.
How can I verify the SF30C-12 is spinning correctly after wiring it to 12 V?
Apply 12 V to the 2 pin leads; the ball bearing fan should start immediately and run smoothly without audible rattling.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001055BTC
Raktáron